EDZTE619.1B Discrete Semiconductor Products

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The EDZTE619.1B is classified as a Zener diode, a single diode offering a range of features, including low noise, long life and low capacitance. These characteristics make the EDZTE619.1B ideally suited for a variety of applications, such as voltage smoothing and voltage regulation.

The most common use of the EDZTE619.1B is as a tunnel diode, allowing the current to flow in either direction when the voltage reaches a certain level. In a given circuit, the device operates like a resistor, allowing the current to continue to flow until the breakdown voltage is reached. The breakdown voltage is set much higher than the threshold voltage, allowing for the voltage to be increased when the device is activated.

Other uses for the EDZTE619.1B include voltage regulator circuits and load switches. For example, it can be used to regulate the voltage in a circuit by limiting the peak current. The device also acts as a load switch by providing current and voltage regulation, allowing the load to be switched on or off when the DC voltage reaches the threshold voltage.

The EDZTE619.1B can also be used as a trigger diode, allowing a specific voltage to be exceeded in order to activate a certain function. This could be used to control the switching of other components, or to decrease the need for manual switching.

In addition to these uses, the EDZTE619.1B can also be used in oscillators and piezoelectric circuits. In oscillator circuits, the device acts as a rectifying element, allowing the signal to be tuned to a specific frequency. In piezoelectric circuits, the device amplifies the signal when a specific voltage is exceeded.

The EDZTE619.1B utilizes the principle of reverse and forward biasing of a diode with an integrated resistor, commonly referred to as a Zener diode. Reverse biasing occurs when the anode is connected to a more positive voltage source than the cathode, while forward biasing occurs when the anode is connected to a more negative voltage source than the cathode.

When a Zener diode is reverse biased, the voltage across it is decreased until the breakdown voltage is reached. This causes the diode to behave like a short circuit, allowing the voltage to become equal to that of the breakdown voltage. When a Zener diode is forward biased, the current is limited to a certain level. This also results in the voltage across it being limited to the forward voltage drop.

The breakdown voltage of the EDZTE619.1B is typically between 6V and 7V and the forward voltage drop is typically between 0.2V and 0.3V. The device also features a high surge current and low thermal resistance, making it well-suited for a wide range of applications.

In conclusion, the EDZTE619.1B is a Zener diode that is ideally suited for a number of different applications, such as voltage smoothing, voltage regulation, trigger diodes, oscillators, and piezoelectric circuits. This device utilizes the principles of reverse and forward biasing to regulate current and voltage, while also featuring high surge current and low thermal resistance.

The specific data is subject to PDF, and the above content is for reference