EGL41FHE3_A/I

Series:	Automotive, AEC-Q101, Superectifier®
Part Status:	Active
Diode Type:	Standard
Voltage - DC Reverse (Vr) (Max):	300V
Current - Average Rectified (Io):	1A
Voltage - Forward (Vf) (Max) @ If:	1.25V @ 1A
Speed:	Fast Recovery = 200mA (Io)
Reverse Recovery Time (trr):	50ns
Current - Reverse Leakage @ Vr:	5µA @ 300V
Capacitance @ Vr, F:	14pF @ 4V, 1MHz
Mounting Type:	Surface Mount
Package / Case:	DO-213AB, MELF (Glass)
Supplier Device Package:	DO-213AB
Operating Temperature - Junction:	-65°C ~ 175°C

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

EGL41FHE3_A/I is a one-phase rectifier bridge that serves as a versatile power element for a wide range of applications. It is constructed with four diodes and has the unique ability to transform input power from an alternating current (AC) source into direct current (DC). EGL41FHE3_A/I is commonly used in power electronics circuits and provides electrical isolation, synchronous rectification, and transient protection.

General Description

EGL41FHE3_A/I is designed to provide a high-voltage, full-wave rectification up to a working voltage of 500 V and a power rating of 30 A, with a peak repetitive reverse voltage of 1000 V. This bridge rectifier combines robustness, low leakage current (maximum of 24 μA), high-temperature tolerance (up to 150℃ junction temperature), low profile (just 10.5 mm in height), and low thermal resistance. Built with four diodes and two terminals, the EGL41FHE3_A/I can be used in a variety of AC-DC power conditioning application, including but not limited to, motor drives, light dimmers, solar systems, and AC to DC power conversion. The bridge rectifier\'s low losses and efficiency is a major benefit for many applications.

Features and Benefits

When using the EGL41FHE3_A/I rectifier, here are some features and benefits to consider:

• High ripple current: With high ripple current (maximum of 40 A), the EGL41FHE3_A/I can be used for a variety of applications that require high-speed switching and high current efficiency.
• Low current leakage: With only 24 μA of current leakage, the EGL41FHE3_A/I can isolate critical load circuits from high voltage sources.
• Small package: The EGL41FHE3_A/I is built in a small form factor of just 10.5 mm in height, so it can be used in tight spaces where larger rectifier bridges would not fit.
• No external heat sink is required: This is beneficial because the EGL41FHE3_A/I can be used without any additional cooling components.
• High temperature resistance: With 150℃ junction temperature and operating temperature of +175℃, the EGL41FHE3_A/I rectifier can be used in applications with a variety of harsh environments.
• Wide voltage range: The bridge rectifier can handle a wide range of input voltages, up to 500V DC, with a peak reverse voltage of 1000V.

Construction and Operation

EGL41FHE3_A/I is made up of four 1N4007 silicon diodes connected in a bridge configuration. This arrangement causes the two diodes that are connected in the opposite direction to be the ones conducting current during each half-cycle, allowing for current to flow in one direction only. When used in an AC circuits, the bridge rectifier will convert any alternating voltage into a direct voltage.This bridge rectifier consists of two terminals: a positive (anode) and a negative (cathode). The bridge rectifier also has an integral heat sink, which helps to dissipate heat generated by the four diodes internally. The EGL41FHE3_A/I’s rugged encapsulation, complete with a robust flange, provides excellent durability and reliability.

Applications

The EGL41FHE3_A/I is commonly used in automotive, industrial, and consumer applications. The bridge rectifier is ideal for applications where higher ability to bear the high shock and vibration environmental loads is required. Its high temperature capabilities and robust construction make it ideal for power conditioning applications, such as motor drives, AC-DC power supplies, lightning ballasts, sunroofs, and motor speed controllers. The EGL41FHE3_A/I is also used in medical equipment, for aerospace and avionic systems, and for other applications that require a reliable power source.

Conclusion

The EGL41FHE3_A/I is a one-phase rectifier bridge that provides electrical isolation and synchronous rectification. This bridge rectifier can provide a high-voltage, full-wave rectification up to a working voltage of 500 V, with a peak repetitive reverse voltage of 1000 V. It has many advantages, such as high ripple current, low current leakage, small package, no external heat sink, high temperature tolerance, and wide voltage range, which make the EGL41FHE3_A/I suitable for power conditioning applications. The EGL41FHE3_A/I is an ideal solution if you are looking for a durable and reliable bridge rectifier.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description