EMIF06-1002F2

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

EMI/RFI filters are designed to protect electronic circuits from the problems caused by electromagnetic interference. They are also used for limiting the level of radio frequencies generated by electronic equipment. The EMIF06-1002F2 is a type of EMI filter designed for very low impedance and very low power applications. It combines the capabilities of an inductor with the advantages of a capacitor.

The EMIF06-1002F2 is capable of providing a wide range of impedance values, ranging from 0.15 Ohms to 0.3 Ohms, and its power handling capabilities are as low as 3mW. This makes the EMIF06-1002F2 an ideal choice for many applications, such as data communication, power line noise suppression, power cycle harmonics, and noise suppression during data transmission.

The working principle of the EMIF06-1002F2 is based on the principle of electromagnetic interference. It uses a combination of inductors and capacitors to create a filter which reduces the level of electromagnetic interference. These components act together to create a “ladder” of frequencies which differentiates between the signals and the interference. The capacitors help to reduce the higher frequency interference while the inductors help to reduce the lower frequency interference.

The EMIF06-1002F2 is particularly useful for applications where low power and low impedance levels are required, such as with battery-powered devices. The filter is also designed to be highly reliable, and it has a self-resetting circuit that will automatically reset the filter in the event of an overcurrent or overvoltage condition.

In summary, the EMIF06-1002F2 is an effective and reliable solution for many applications due to its combination of low power and low impedance capabilities, and it is ideal for use in battery-powered and data communication applications as well as power line suppression. The filter utilizes a combination of inductors and capacitors to reduce the level of interference, ensuring that the desired signals are not interfered with while unwanted noise is removed.

The specific data is subject to PDF, and the above content is for reference