EMIF08-1005T16 Filters

Current:	50mA
Height:	0.022" (0.55mm)
Size / Dimension:	0.130" L x 0.053" W (3.30mm x 1.35mm)
Package / Case:	16-UFDFN Exposed Pad
Mounting Type:	Surface Mount
Voltage - Rated:	--
Applications:	Data Lines for Mobile Devices
Operating Temperature:	-40°C ~ 85°C
ESD Protection:	Yes
Values:	R = 100 Ohms, C = 9pF (Total)
Series:	IPAD™
Resistance - Channel (Ohms):	100
Attenuation Value:	--
Center / Cutoff Frequency:	--
Number of Channels:	8
Technology:	RC (Pi)
Filter Order:	2nd
Type:	Low Pass
Part Status:	Obsolete
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

EMI/RFI Filters (LC, RC Networks) usually consist of inductor, capacitor, or other components to provide noise filtering, while keeping the desired signals as much as possible. The EMIF08-1005T16 is a 10A filter with two-line common mode filter for EMI suppression. The EMIF08-1005T16 is commonly used in electronic systems such as plug-pack, communication equipment, and other power supply applications.The EMIF08-1005T16 is a two-line common mode filter designed with discrete capacitors and inductive elements. It has two pins on each side with powder core material for better EMI suppression. The resistance and frequency response of the EMIF08-1005T16 are optimized to provide excellent attenuation up to 10A of current and 1MHz of frequency.The working principle of the EMIF08-1005T16 is simple yet effective. It uses elements such as capacitors and inductors to form a type of circuit that blocks incoming noise, while allowing desired electrical signals to pass through with minimal distortion.The capacitors of the EMIF08-1005T16 are typically electrolytic and ceramic varieties that perform a high-pass filter. The capacitors act as an impedance, blocking low-frequency noise and allowing higher frequencies to pass through. The inductors, on the other hand, are typically iron powders and air coil types that act as a low-pass filter, blocking high frequencies and allowing low frequencies to pass through. Both capacitors and inductors work together to filter out noise signals by reducing the strength of the transmitted signal.The EMIF08-1005T16 is most commonly used as an AC or DC power filter in a variety of electronic systems such as electronic equipment, audio-video devices, or communication systems. The filter acts as a noise blocker to suppress any type of EMI and RFI interference that could affect the system’s performance. It is also designed to reduce the harmonics of an AC voltage, allowing the user to maximize their energy efficiency.In addition, the EMIF08-1005T16 filter has the capability to reduce high-frequency signals caused by different types of electrical appliances, such as air conditioners, microwave ovens, or other electrical appliances. This is due to its EMI suppression capabilities, which are able to effectively reduce harmonics, as well as properly isolate analog and digital signals.Furthermore, the EMIF08-1005T16 is an easy to install and use filter. It has simple installation procedures and can be easily connected to existing power lines. The filter also boasts a durable design, with some models IP52 certified, that can withstand the harshest environments.Overall, the EMIF08-1005T16 is an effective two-line common mode filter designed for AC and DC power lines. It is a great choice for electronic systems that require an effective EMI and RFI noise filter. Its discrete capacitors and inductive elements are specifically designed to provide excellent attenuation up to 10A of current and 1MHz of frequency. With its simple installation and high performance, the EMIF08-1005T16 is a great choice for any system looking for an effective noise filter.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description