GP10G-4004EHE3/54

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

GP10G-4004EHE3/54 is a diodes - rectifiers - single device. It is widely used in power electronic applications such as solar panels, charging circuits, DC/DC converters and buck converter systems. This device has a high breakdown voltage of 400V, a surge forward current of 10A, and a high-temperature operation capability.

The operation of GP10G-4004EHE3/54 is based on rectification. It works by allowing electric current to flow in one direction, while blocking or suppressing electric current from flowing in the opposite direction. This is done by a combination of two alternating-polarity semiconductor planes, called the anode and the cathode. The anode is the positive terminal and the cathode is the negative terminal.

In the GP10G-4004EHE3/54, the anode is connected to a p-type semiconductor layer. The cathode is connected to an n-type semiconductor layer. When a positive voltage is applied to the device, electric current flows from the anode to the cathode. Meanwhile, an opposing electric field is generated inside the diode that prevents electric current from flowing in the reverse direction. This device is therefore effectively used to rectify alternating current (AC) and produce direct current (DC).

GP10G-4004EHE3/54 can also be used for power conversion. During power conversion, the rectification process is followed by a boost converter, providing a much higher level of electrical energy than what was initially supplied. The output from the rectification process is then rectified by the boost converter and is supplied to the load. In this way, the GP10G-4004EHE3/54 can be used to boost low voltage to higher voltage and also to regulate the current level.

GP10G-4004EHE3/54 is designed to have a maximum operating temperature of -45℃ to 155℃. This device is known for its robustness and high endurance. It has a good thermal response and stays stable under harsh environmental conditions. The device is also designed with a low reverse current leakage. Low leakage is essential in order to maintain high efficiency during the rectification process.

GP10G-4004EHE3/54 is commonly used in power electronic applications such as solar panel charging, battery charging and LED lighting. It is also used in high-precision energy measurement devices such as watt- and watt-hour meters. This device is suitable for various industrial, medical and consumer applications.

The specific data is subject to PDF, and the above content is for reference