GP10-4002EHE3/53

Series:	Automotive, AEC-Q101, Superectifier®
Packaging:	Tape & Box (TB)
Part Status:	Obsolete
Diode Type:	Standard
Voltage - DC Reverse (Vr) (Max):	100V
Current - Average Rectified (Io):	1A
Voltage - Forward (Vf) (Max) @ If:	1.1V @ 1A
Speed:	Standard Recovery >500ns, > 200mA (Io)
Reverse Recovery Time (trr):	3µs
Current - Reverse Leakage @ Vr:	5µA @ 100V
Capacitance @ Vr, F:	8pF @ 4V, 1MHz
Mounting Type:	Through Hole
Package / Case:	DO-204AL, DO-41, Axial
Supplier Device Package:	DO-204AL (DO-41)
Operating Temperature - Junction:	-65°C ~ 175°C

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

GP10-4002EHE3/53 is a single-body diode rectifier. It is a general-purpose diode with a fairly large current and a fairly small voltage drop. It is typically used in power rectification applications where a relatively high current needs to be rectified with a low voltage drop. The principle of operation is relatively straightforward. When a diode is placed in a circuit, it conducts current in only a single direction. The voltage drop across the diode is roughly equivalent to a certain saturation voltage, which is determined by the type of semiconductor material used in the diode\'s construction. The GP10-4002EHE3/53 diode has a low saturation voltage of about 0.82V, which is typical for a standard rectifier diode. When a large amount of power needs to be rectified from an alternating current source, a bridge rectifier is usually employed. This consists of four diodes arranged in a bridge configuration. When the power supply\'s AC voltage is applied to the bridge circuit, the diode connected to the positive side of the AC voltage source will conduct, allowing current to flow from the source to the load. When the AC source reverses, the polarity of the voltage across the diodes will also reverse, causing the diode on the negative side of the AC source to conduct, thereby allowing current to continue to flow through the circuit. This process is repeated in a continuous cycle, allowing the load to be powered with a DC voltage. The GP10-4002EHE3/53 diode is often employed as a single rectifier in a DC to DC power supply, where it is typically used to rectify an AC voltage. It can also be used in bridge rectifier circuits, where its low voltage drop makes it an ideal choice. When using a single diode to rectify an AC voltage, the diode\'s current rating should match the power supply\'s maximum output current, and its reverse leakage current should be kept within the manufacturer\'s specified limits. In addition, the diode should be able to handle the maximum peak AC voltage that is encountered in the power supply. The GP10-4002EHE3/53 diode offers a high current rating of 7A and a reverse leakage current rating of 4.2uA, making it suitable for most DC to DC power supply applications. The GP10-4002EHE3/53 diode has a wide range of applications, from small power supplies to large industrial rectifier circuits. Its low saturation voltage, high current rating and good reverse leakage current characteristics make it an ideal choice for a wide range of applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description