GP10K-041M3/54

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The GP10K-04M3/54 is a single diode rectifier, typically used for full wave rectification in power supplies, motor controls and other process control applications. It is a fast, symmetrical device that provides a low to moderate current capability for both polarities of application. It has a maximum reverse voltage rating of 10,000 volts. It is also used for general power supplies and other circuit protection functions.

The GP10K-04M3/54 is a single silicon diode and uses a metal to metal electrode connection for stability and reliability. Its negative temperature coefficient of resistance (NTCR) ensures consistent performance even with temperature variations. Its rated power dissipation is 25W and its maximum reverse voltage rating is 10kV.

The working principle of the GP10K-04M3/54 is simple. When the forward voltage reaches its turn-on voltage of around 0.7 volts, current begins to flow through the device. The current is limited by the device\'s forward voltage, which is determined by the Vf/If characteristics. As the forward voltage increases, the current flowing through the device also increases. Once the forward voltage reaches its maximum rating, the device will then shut off completely.

During the reverse voltage condition, it passes no current for the first 8kV, then begins to break down, allowing an increasing amount of current to pass depending on the reverse voltage. This reverse voltage can reach up to 10kV. During the reverse voltage condition, the device is in its ‘zener-like’ mode, passing current in the reverse direction.

The GP10K-04M3/54 has a fast response and does not require additional protection circuitry, thus eliminating the need for additional components for overload protection. Its low forward voltage drop is an advantage over conventional rectifiers, which requires an increase in transformer size if the forward voltage is too high. Its low forward voltage drop and fast response speed makes the GP10K-04M3/54 an ideal choice for rectification applications in a variety of industries.

In conclusion, the GP10K-04M3/54 is a single diode rectifier, which is ideal for full wave rectification in power supplies, motor controls and other process control applications. It is capable of passing 10kV and 25W of power. It operates on a low to moderate current and provides a fast response with low forward voltage drop. It does not require additional protection circuitry, thus making it a popular choice for applications in the industrial, automotive and consumer electronics industries.

The specific data is subject to PDF, and the above content is for reference