GTL2034PW,118

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Logic-buffers, drivers, receivers, and transceivers are part of the GTL family of logic components from Texas Instruments. The GTL2034PW,118 is a bidirectional, differential, CMOS, high-frequency, high-speed transceiver.

The transceiver is designed for a wide range of applications, including data, clock, and address busses. It is a low-power, low-cost solution to four-channel data-bus systems which provide an ideal choice for high-speed point-to-point connections.

The transceiver supports four to five byte busses and 21 to 29 bit data words. It is implemented as an open-drain, four-channel bus interface that can operate at speeds up to 100MHz with a 250ps setup and hold time. The transceiver uses three voltage levels - logic-1, logic-0 and high impedance; making it suitable for most applications with minimal power drawn from the bus.

The GTL2034PW,118 uses two transistors, one N-channel and one P-channel, connected in a complementary pair. This arrangement can achieve high-speed switching due to the fast switching time of the complementary transistors. The transistors are driven by an internal clock signal, which is generated from an external clock. The transistors operate at high-speed on the rising and falling edges of the signal, allowing for fast signal switching which minimizes transitions on the bus.

The transceiver also features a fail-safe power-off monitoring feature. This feature monitors the voltage levels of the bus and will automatically shut off signal transmission if the voltage levels fall below a predefined threshold. This ensures that data integrity is maintained even in the presence of power fluctuations.

The transceiver is also equipped with a variety of protection features. These include over-voltage clamping and overcurrent protection, which protect the transceiver against electrical damage due to sudden power surges. Additionally, the transceiver has built-in logic-level protection which prevents an output from exceeding its absolute maximum limit.

The GTL2034PW,118 is an ideal solution for high-speed, point-to-point communication applications. It is well-suited for a variety of data-bus systems and its protection features ensure data integrity during power fluctuations. With its high-speed operation, low power consumption and low cost, the GTL2034PW,118 is a great choice for any high-performance application.

The specific data is subject to PDF, and the above content is for reference