JANTX1N4462US.TR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes are two-terminal electronic components that allow current to flow in one direction whereas blocking current from flowing in the opposite direction. Zener diodes are a special type of diode, usually a P-N junction diode, which is designed to operate in the reverse breakdown region. These diodes, when subjected to an increased voltage, can maintain an almost constant voltage at their anode and cathode terminals. The single Zener diode JANTX1N4462US.TR belongs to this classification, and has some unique properties and applications.

The JANTX1N4462US.TR is rated as a 36 volt Zener diode at a power dissipation of 500 mW. It is mainly used in circuits that require voltage regulation and as a clamp device when a strong current is suddenly applied to a circuit. It has a surface-mount case and is designed for single-side board mounting. The mounting tab length is about 1.4 mm and the total dimensions are 5.08 x 3.81 mm. The Zener diode pinchoff voltage, the minimum biasing voltage, is 7 volts. The differential resistance at breakdown is 775 Ohms(max). It has a Zzt of 14 max along with a Leakage Current of 50 uA @ 6 V. It also features a thermal resistance of 295°C/W.

The JANTX1N4462US.TR is mainly used to protect circuitsfrom unwanted voltage spikes. In power systems, it is used to protect lowvoltage systems from high-voltage peaks by providing a direct path for thehigh-voltage peak to the ground. In some cases, the Zener diode is connectedin series to the transformer windings of the low voltage system, thus protectingit.

The working principle of the JANTX1N4462US.TR is verysimple. When a voltage potential is applied across the anode and cathode, an electriccurrent passes through the diode until it reaches its breakdown voltage, which is36 V for the JANTX1N4462US.TR. At this point, a voltage change occurs,causing a large current to flow through the diode. This current then reducesthe voltage across the diode to its breakdown value, thus protecting thecircuit from any further voltage fluctuations.

The JANTX1N4462US.TR is a reliable, low-cost, andeasy-to-use single Zener diode that can be used for a variety of applications.It can be used to protect circuits in power systems, to provide a direct pathfor voltage spikes to the ground, and to regulate voltages in circuits. Itssimple design and cost-effectiveness make it a preferred choice for manyelectrical applications.

The specific data is subject to PDF, and the above content is for reference