JANTX1N6315D

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

JANTX1N6315D is a single Zener diode that can be used in a wide range of applications.

A Zener diode is an electronic device that is built from two electrodes and a semiconductor material, typically silicon. It behaves like a normal diode, allowing current to flow in only one direction, but unlike other diodes it also allows current to flow in the reverse direction if the voltage applied exceeds a certain value. This reverse breakdown voltage is called the "Zener voltage" and is a characteristic of each Zener diode. The JANTX1N6315D has a nominal breakdwon voltage of 5.6 volts.

The JANTX1N6315D can be employed in many types of circuits, with its primary application being the creation of a voltage reference. To do this, the diode is placed across a power supply where it will draw current that is proportional to the applied voltage. If the applied voltage is less than the Zener voltage then no current will flow; if the voltage applied is higher than the Zener voltage then, depending on the size of the load connected to it, the diode will draw a certain amount of current - the value depending on the resistor used with the diode. This will allow the user to create a reference voltage with the diode that won\'t be affected by current fluctuations.

Other than creating a voltage reference, the JANTX1N6315D can also be used to provide voltage protection in circuits. As the voltage applied to the diode reaches the Zener voltage, the current flowing through the diode will start to increase. This current will protect the other components in the circuit, as it will redirect any sudden increases in voltage away from the other parts.

The JANTX1N6315D can also be used as a switching device and as a stabilizing element in voltage regulators. In this case the diode works exactly like a bipolar transistor or a MOSFET. When the voltage applied is lower than the Zener voltage, no current will flow, while when the voltage is higher than the Zener voltage the diode will start to conduct, thus allowing current to flow.

The JANTX1N6315D works on the same principle as any other Zener diode. The junction between the two electrodes contains a semiconductor material that acts like a resistor. When the voltage applied is lower than the Zener voltage no current will flow, while if the voltage is above the Zener voltage then the diode will start to conduct. This allows a small amount of current to flow, thus creating a voltage reference or providing voltage protection.

The specific data is subject to PDF, and the above content is for reference