JANTX1N968BUR-1

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes are electronic components that allow current to flow in only one direction. Zener diodes, which are specialized types of diodes, are designed to operate in reverse bias and have a breakdown voltage, known as the Zener voltage, that allows a certain amount of current to flow in the reverse direction. A single Zener diode is an individual Zener diode that works in a similar manner as any other Zener diode, but does not require external resistors for operation.

The JANTX1N968BUR-1 is a single Zener diode and is designed for high temperature operation. It has a reverse breakdown voltage of 9.8V with a max junction temperature of 175 degrees Celsius. It has a total power dissipation of 200mW (maximum) and is considered an axial-lead device with a power rating of 1/2 watt. The JANTX1N968BUR-1 has an operating current of 80mA, a leakage current of 1mA and a peak forward surge current of 130mA.

The JANTX1N968BUR-1 is primarily used in applications where the Zener diode is required to operate in high temperature environments. Specifically, in high temperature linear voltage control, regaulating voltage output, voltage clamping and bypassing applications. It is also used to limit over-voltage conditions in electronics equipment designed to be in operation in high temperature environments.

The working principle of the JANTX1N968BUR-1 is a direct application of the operation of any other single Zener diode. It works in a reverse bias condition and the breakdown voltage, referred to as the Zener voltage, will be 9.8V in this case. When the voltage at the anode of the diode is equal to or greater than 9.8V, the diode will become to conduct and the current will start to flow. The current flowing through the diode is limited by the leakage current of 1mA and within a temperature range of -65 to 175 degrees Celsius it will maintain its breakdown voltage at 9.8V.

The JANTX1N968BUR-1 thus acts like a voltage regulator in the sense that it will maintain a constant voltage output under varying current load conditions. This constant voltage output makes the diode suitable for applications such as voltage regulation, voltage clamping and bypassing. Additionally, it can be used in digital circuitry as a protection from voltage surges and over-voltage conditions.

In summary, the JANTX1N968BUR-1 is a single Zener diode that is designed for high temperature operation and is used in applications where the device is required to operate in high temperature environments. It has a reverse breakdown voltage of 9.8V with a max junction temperature of 175 degrees Celsius and a total power dissipation of 200mW (maximum). The JANTX1N968BUR-1 is mainly used in voltage regulation, voltage clamping and bypassing applications as well as to limit over-voltage conditions in electronics equipment.

The specific data is subject to PDF, and the above content is for reference