JANTXV1N5526BUR-1

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes act as a switch, allowing current to flow in one direction but blocking it from flowing in the other direction. Zener diodes are a type of diode that have a reverse breakdown voltage, meaning that current will flow in reverse during a certain voltage range. The JANTXV1N5526BUR-1 is a single zener diode with a maximum power rating of 500 mW, a maximum reverse voltage of 12 V, and a voltage tolerance of 5 %.

The JANTXV1N5526BUR-1 is primarily used in voltage regulation applications, as it is able to hold a stable voltage output even when the voltage input changes. This makes it useful in a variety of applications, such as power supplies, circuit protection, and pulse-width modulation circuits. The diode is also able to handle high-frequency and high-current applications due to its low capacitance and low storage time.

When applying the JANTXV1N5526BUR-1, the voltage on the anode and cathode terminals must be equal for the diode to enter its forward-biased state. When the voltage between the anode and cathode is greater than the zener voltage, the diode will enter its reverse-biased state and start to conduct current from the anode to the cathode. In this reverse-biased state, the diode will maintain a constant voltage, regardless of any variations in the input.

The JANTXV1N5526BUR-1 can be used for voltage regulation in both AC and DC circuits. In an AC circuit, the zener diode must be connected in series with the AC voltage source and a current limiting resistor. When a voltage is applied to the circuit, the current will flow through the resistor and the diode. As the voltage increases, the diode\'s reverse current will start to increase and will eventually reach its maximum reverse voltage, at which point the diode will begin to regulate the voltage.

In a DC circuit, the diode can be connected in series with a load, with the diode\'s anode connected to the load\'s positive terminal and the diode\'s cathode connected to the load\'s negative terminal. As with the AC circuit, when a voltage is applied, the current will flow through the diode and the load. The diode will regulate the voltage to its designated voltage rating, allowing the load to receive a constant voltage.

The JANTXV1N5526BUR-1 is a single zener diode that can be used in a variety of applications, such as voltage and current regulation, circuit protection, and high-frequency and high-current applications. Its maximum reverse voltage of 12 V and voltage tolerance of 5 % make it ideal for use in semiconductor circuits, allowing it to provide reliable and stable performance.

The specific data is subject to PDF, and the above content is for reference