KA78R09CTU

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The KA78R09CTU is a three-terminal, adjustable, and linear voltage regulator commonly used in power management ICs, or PMICs. It is usually used in systems that require a regulated voltage spanning from 1.5V to 12V.

The device is designed to deliver and maintain a regulated output voltage despite fluctuations of the input voltage, noise and other instability. This is made possible through the use of an adjustable voltage reference, an error amplifier and a series element, typically a transistor.

The KA78R09CTU is configured by three pins; the adjustment pin, providing a reference voltage (Vref); the input pin, which connects to the source of power (Vin); and the output pin, which connects to the load and produces the regulated voltage (Vout).

The feedback loop of the regulator begins at the output, with Vout being compared against a Vref. If Vout is higher than Vref, the loop activates to decrease Vout. The opposite is true if Vout is lower than Vref, the loop will cause Vout to increase.

The adjustment pin of the regulator allows for the adjustment of the reference voltage by enabling or disabling the internal voltage divider, which sets the reference voltage. The reference voltage sets the maximum output current and the maximum input voltage of the regulator.

The input pin must always be connected to the higher voltage, with the output pin connected to the lower voltage. This ensures that current passes through the series element, in this case a transistor, as it switches on and off in order to regulate the output voltage, as determined by the reference voltage.

The KA78R09CTU is typically used in industrial and commercial applications, process control systems, test and measurement equipment, microwaves, air conditioners, audio amplifiers and other low power applications.

This voltage regulator functions by accepting or rejecting, a fraction of the input current by the feedback loop, and steering that current away from or towards the load in order to produce a regulated output voltage. This regulation is essentially achieved by the comparison of the output voltage from the reference voltage being used.

It is important to note that for the KA78R09CTU, the output voltage is adjustable, but the input voltage must remain at 12V or below. It is also capable of supplying up to 500mA of output current and making it suitable for most low power applications.

In summary, the KA78R09CTU is a three-terminal, adjustable, and linear voltage regulator typically used in power regulation systems requiring a regulated voltage between 1.5V to 12V. It works by comparing the output voltage against a set reference voltage before adjusting the output voltage as needed by means of a feedback loop. The device is capable of supplying up to 500mA of output current and is suitable for most low power applications.

The specific data is subject to PDF, and the above content is for reference