LM25115AMTX/NOPB

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The LM25115AMTX/NOPB is a Power Management Integrated Circuit (PMIC), specifically a Power Supply Controller and Monitor, designed to offer efficient and reliable power management in consumer, industrial, and automotive applications. This power supply controller and monitor can be used to provide efficient power management between different blocks or systems, such as a digital system and analog system, or for providing power for multiple loads. It is an integrated circuit that can monitor the output loading on an AC/DC or DC/DC power supply, and has a wide range of protection features to ensure safe and reliable operation.

Features

The LM25115AMTX/NOPB has a wide range of features, which include adjustable output voltage, wide input voltage range, and the ability to monitor output voltage and current. It also has an over-temperature protection and over-voltage lockout feature that will disconnect the output if the temperature or voltage exceeds specific predetermined bounds.

The LM25115AMTX/NOPB has both low-side and high-side MOSFET outputs for driving power, both configurable for either high-side or low-side operation. It also provides a logic-level enable/disable signal and programmable peak current limit to prevent over current or inrush conditions. In addition, it includes a programmable soft-start feature, which sets a ramp-up rate for the output voltage. The device also provides internal current-sense circuitry and programmable delay times, allowing it to respond to output current spikes that would otherwise exceed the peak current limit.

Application Fields

The LM25115AMTX/NOPB is a very useful component in a variety of different application fields, including, but not limited to, home appliances, industrial equipment, automotive electronics, industrial motors, robotics, and power grids.

In home appliance applications, the LM25115AMTX/NOPB can be used for efficient power management, providing power for multiple loads. For example, in a washing machine, it can be used to provide power for the motor, the pump, and the control system, as well as providing protection against over-current and over-temperature. In industrial equipment, the LM25115AMTX/NOPB can be used to provide efficient power management for motors, pumps, and other components, and provide protection against over-voltage, over-currents and over-temperature.

In automotive electronics, the LM25115AMTX/NOPB can be used as a module in powertrain systems, and can be used to provide efficient power management between the digital and analog systems, providing easy integration into the design. It can also be used in robotics and power grids, providing efficient power management, as well as providing over-voltage, over-current, and over-temperature protection.

Working Principle

The LM25115AMTX/NOPB is designed to provide efficient power management and protection in different application fields. The working principle of the device is based on the Buck-boost topology, which is basically a DC/DC converter, using an inductor, diode and MOSFET. The diode is used to either connect or disconnect the input voltage from the output voltage, while the MOSFET is used to switch current flow between the input and output. The inductor is used to store energy, and is responsible for maintaining the output voltage at its desired level.

The LM25115AMTX/NOPB uses a voltage feedback loop to maintain the output voltage at the desired level and prevent over-voltage conditions. It monitors the output voltage and adjusts the duty cycle of the MOSFET switch accordingly. When the output voltage is lower than the desired level, the duty cycle of the MOSFET is increased to pull more current from the input and increase the output voltage. When the output voltage is above the desired level, the duty cycle of the MOSFET is decreased, reducing the current drawn from the input and lowering the output voltage. This adjustment loop is maintained until the output voltage reaches the desired level.

The LM25115AMTX/NOPB also provides several protection features, such as over-voltage, over-current and over-temperature protection. For over-voltage protection, the device will act as soon as the output voltage rises to a certain level and will either reduce the output voltage or disconnect the output completely to protect the connected device. Similarly, for over-current protection, the device will limit the current that can be drawn from the input, thus preventing damage to the connected load.

The LM25115AMTX/NOPB is a very useful and reliable power supply controller and monitor, which can provide efficient and reliable power management in different application fields. It is specifically designed to provide efficient power management, protection, and expanded control capabilities for a wide range of applications. By virtue of its wide range of features, the LM25115AMTX/NOPB can enable designers to create power supplies that are reliable, efficient and cost-effective.

The specific data is subject to PDF, and the above content is for reference