LM2901DRG4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The LM2901DRG4 is a dual high-speed voltage comparator designed for precision low power operation. This device is used in a variety of applications, including but not limited to, power supply sequencing and sequencing, periodic timing, and emergency cutoff. The LM2901DRG4 is particularly well-suited for precision applications due to its low offset voltage, low bias current, fast response time, and good line regulation.

The LM2901DRG4 belongs to a family of integrated circuits (ICs) known as linear-comparators. They are used in a variety of circuit applications where it is necessary to compare two voltages and then decides whether one is higher or lower than the other. A linear comparator essentially contains one or more differential amplifier stages that takes inputs from the two voltage sources and then amplifies the difference between them. The amplified signal is then used to drive a digital logic circuit that outputs logic level signals, which can ultimately be used to control the state of some electronic device.

The LM2901DRG4 is a dual comparator with each comparator having two inputs. The two inputs can be used to compare two separate voltage sources or two separate points within a single voltage source. The inputs are usually labeled A and B. Each comparator also has an output signal which is triggered when the voltage at the A input is larger than the voltage at the B input, or vice versa. The output is usually labeled as OUT, and is an open drain signal which can be connected to other logic or control circuits.

The LM2901DRG4 is a general purpose comparator with a variety of features that make it suitable for many types of circuits. These features include its wide operating temperature range, its high accuracy, its low supply voltage range, its low power consumption, and more. It has an input common-mode voltage range of ±15V, and a single supply operation of 2V to 36V.

The LM2901DRG4 also features a wide supply voltage range and a low bias current. This allows the device to operate over a wide range of voltages, making it suitable for many different types of applications. The device also has an adjustable shutdown feature, which allows it to be powered down when not in use.

When comparing two voltages with the LM2901DRG4, the input voltages must be between V COM and V COM + 15V. The comparator will only output a logic level signal if the A input is greater than the B input. This logic level signal can then be used to control other electronics, like a switch or relay, depending on the specific application.

The LM2901DRG4 is a useful device for a variety of applications, such as in interfacing two or more digital circuits or for generating a GO/NO-GO signal output. It is also used in instrumentation and control systems, as well as in analog-to-digital converters, digital-to-analog converters, and power supplies. It is also used in portable devices and PCs, as well as in industrial process control and other automation systems.

In summary, the LM2901DRG4 is a dual, high speed voltage comparator designed for low power operation and precision applications. It is widely used in a variety of applications, including but not limited to, power supply sequencing, periodic timing, and emergency cutoff. Its features and design make it suitable for many different kinds of circuits.

The specific data is subject to PDF, and the above content is for reference