LM293ADG4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The LM293ADG4 can be classified as a comparator. Comparators are linear electronic circuit elements generally used to compare two input voltage signals, and then output either a logical high or low signal. A comparator\'s primary purpose is to make a decision based on the input signals it receives, and generate output accordingly. Comparators are often used in applications requiring rapid or precise decisions.

In a nutshell, the LM293ADG4 comparator compares two input signals on its two input pins (IN1 & IN2) and generates a logic signal at its output pin (OUT) with respect to the relationship between the two inputs. If the input signal at the IN1 pin is greater than the input signal at the IN2 pin, then the LM293ADG4 comparator will output a logic high signal at its output pin. On the other hand, if the input signal at the IN1 pin is less than the input signal at the IN2 pin, then the LM293ADG4 comparator will output a logic low signal at its output pin.

The LM293ADG4 comparator is an integrated circuit component. This component is a single open-collector 8-pin dual-in-line (DIP) package, and is easy to connect and use on a circuit board. The LM293ADG4 component operates under a power voltage range of 2.7 to 11 volts, and is designed for a maximum output current of 2mA. Its response time is normally less than 1.5 microseconds, and its offset voltage range is -2.7 to +2.7mV.

The LM293ADG4 comparator also features a high-pulse current and low-saturation voltage. Its high-pulse current capability is considered sufficient to drive TTL and CMOS integrated circuits. This component is also designed with hysteresis, which enables it to produce clean switching signals, and with latch-up protection, which makes it fully operational even in the presence of high-voltage spikes.

The LM293ADG4 comparator is suitable for use in many applications, including level- and battery-monitoring systems, current sensing, over- and under-voltage detection circuits, timer/clock-control circuits and alarm systems. This component can also be used in 48-second timeout counters, or in sequential, or count-down and count-up circuits.

The LM293ADG4 comparator is an easy-to-use and reliable integrated circuit component for various applications. Its wide power voltage range and high pulse-current capability make this component highly useful in wide-ranging circuit applications.

The specific data is subject to PDF, and the above content is for reference