LM3670MF-1.5/NOPB

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Voltage regulation is a very important concept within the world of electronics. In modern society, the use of integrated circuits has become increasingly popular, so too has the development of voltage regulators. One such example of a voltage regulator is the LM3670MF-1.5/NOPB. In this article, we will discuss the application field and working principle of the LM3670MF-1.5/NOPB which falls into the category of PMIC – Voltage Regulators – DC DC Switching Regulators.

The LM3670MF-1.5/NOPB is a synchronous step-down DC-DC converter. It provides a wide voltage output operating range, specifically from 2.5V to 4.5V, and is well suited for a variety of low-power applications. Its on-chip synchronous switches and state-of-the-art H-Bridge topology make it ideal for low input voltage applications such as automotive, industrial, and battery-powered systems. Furthermore, the device is capable of both high-efficiency and fast transient response. This is due to a fixed frequency system that selects either pulse-width modulation (PWM) or pulse-frequency modulation (PFM) to maximize efficiency and reduce current ripple over different load conditions. Additionally, the device contains comprehensive protection features such as current limit, short-circuit protection, and undervoltage lock-out.

The LM3670MF-1.5/NOPB was specially designed to offer the flexibility and reliability needed for today’s most demanding applications. Its advanced features make it suitable for products that require high efficiency and good transient performance. The device is particularly well-suited to applications such as:

• Motor controllers
• Power converters and motor drives
• Power over Ethernet (PoE) power sources
• Battery-powered systems
• Laptop and tablet computers

The LM3670MF-1.5/NOPB is an advanced DC-DC synchronous step-down voltage regulator that integrates many different features. The device is controlled by an internal error amplifier, included to ensure that the output voltage is regulated to a precise, programmable level. Additionally, the device contains both a power-good signal and an enable pin for easy control. The included current-sense input provides improved load regulation and dynamic response and allows the device to respond quickly and accurately to load transients. Finally, the device features low-noise operation and wide conversion range.

The LM3670MF-1.5/NOPB is enabled by a logic-high signal on the EN pin. When enabled, the current-mode PWM control loop is activated, meaning the voltage at the feedback pin is compared to the voltage at the error amplifier input. The difference between the voltages is then amplified and presented to the non-inverting input of the PWM comparator. If the amplified difference is greater than the current reference voltage (IREF), the output of the PWM comparator (FB) goes logic-low and switches off the upper switch. As the voltage at FB falls, the size of the upper switch duty cycle increases. When the voltage at FB is less than the current reference voltage (IREF), the output of the PWM comparator (FB) goes logic-high and turns on the upper switch. These switching operations continue so that the output voltage is regulated to the desired level.

The LM3670MF-1.5/NOPB device is also fitted with an active discharge function that provides load current during discharging of the output capacitor. Additionally, the device includes a PFM/Auto-PFM switching feature to maximize efficiency/reduce current ripple through the inductor over different load conditions.

The LM3670MF-1.5/NOPB is a high-performance, low-noise DC-DC step-down voltage regulator that provides a wide output operating range, fast transient response, and comprehensive protection features. Its wide voltage range and fast transient response capabilities make it a perfect fit for the demanding applications mentioned above.

The specific data is subject to PDF, and the above content is for reference