LMV344IDRG4

Current - Input Bias:	1pA
Base Part Number:	LMV344
Supplier Device Package:	14-SOIC
Package / Case:	14-SOIC (0.154", 3.90mm Width)
Mounting Type:	Surface Mount
Operating Temperature:	-40°C ~ 125°C
Voltage - Supply, Single/Dual (±):	2.5 V ~ 5.5 V
Current - Supply:	107µA
Voltage - Input Offset:	250µV
Series:	--
Gain Bandwidth Product:	1MHz
Slew Rate:	1 V/µs
Output Type:	Rail-to-Rail
Number of Circuits:	4
Amplifier Type:	General Purpose
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

LMV344IDRG4 Application Field and Working PrincipleThe LMV344IDRG4 is a linear amplifier IC from Texas Instruments that has exceptional linearity and low noise for audio and video signals. It is designed to amplify signals from low-level applications such as digital audio and video signals, as well as instrumentation amplifiers, differential amplifiers, and high-gain operational amplifiers.Instrumentation AmplifiersAn instrumentation amplifier is used to amplify low-level signals and reject common-mode interference. An instrumentation amplifier usually consists of three operational amplifiers (op-amps) connected in a differential configuration. The first op-amp acts as a voltage follower, providing the input signal to the second op-amp, which is configured for differential amplification. The third op-amp is used to convert the differential signal to a single ended output. The LMV344IDRG4 can be used as a single-ended instrumentation amplifier, as it is configured with two op-amps in a differential configuration. The first op-amp is configured with an input impedance of 22MΩ, and the second op-amp is configured for differential amplification, providing a gain of approximately 40dB. The output impedance of the LMV344IDRG4 is low, allowing it to drive capacitive loads up to 20pF.Differential AmplifiersThe LMV344IDRG4 is also suitable for use in differential amplifier circuits, as it has the ability to reject common-mode interference. It can be configured as a passive differential amplifier (PDFA), or as an active differential amplifier (ADFA).In a PDFA, the input signals are fed into two balanced resistors, and the output is taken from the nodes where the resistors are connected. This type of amplifier has high gain, but poor common-mode rejection. The LMV344IDRG4 provides a gain of approximately 40dB, making it suitable for use in computing applications where the differential signal must be amplified.In an ADFA, the input signals are fed into two op-amps, and the output is taken from the nodes where the op-amps are connected. ADFAs have better common-mode rejection than PDFAs, as the two op-amps are able to reject signals which are common to both inputs. The LMV344IDRG4 is suitable for use as an ADFA, as it has a common-mode rejection ratio (CMRR) of 70dB and a wide bandwidth of 1.2MHz.High Gain Operational AmplifiersThe LMV344IDRG4 is also suitable for use in high-gain operational amplifiers (op-amps) due to its low noise, high linearity, and wide bandwidth. It can be used as a buffer amplifier, as it has a gain of approximately 40dB, and a low output impedance. It can also be used as a multi-stage amplifier, as it has the ability to drive capacitive loads up to 20pF.ConclusionThe LMV344IDRG4 is a linear amplifier IC from Texas Instruments that can be used in a variety of applications, including instrumentation amplifiers, differential amplifiers, and high-gain operational amplifiers. It has a high input impedance of 22MΩ, a gain of approximately 40dB, and a low output impedance. It has excellent linearity and low noise for audio and video signals, and a wide bandwidth of 1.2MHz. The LMV344IDRG4 is an ideal solution for applications requiring low-level signals amplification.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description