LP87332BRHDRQ1

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

LP87332BRHDRQ1 is a high performance step-down DC-DC converter designed to provide excellent load transient response and low ripple and noise. It is optimized for automotive applications and uses a fixed 5V reference voltage. It is part of the Linear + Switching family in PMIC\'s Voltage Regulators.

The device provides up to 3A switch current and up to 1.2A output current for 3.3V and 5V output voltage options. The device also features programmable current-limit, soft-start and frequency compensation for improved efficiency for battery operated applications. The device can be enabled or disabled by the control pin (EN).

The LP87332BRHDRQ1 features an internal voltage detection circuit to monitor the output voltage when using the enable pin. This enables the user to monitor the output voltage when disabling the load. When the load is disabled, the MOSFET gate drive is regulated at a low level and the non-operating current is reduced. This feature is especially useful for mobile devices that require low power consumption.

The LP87332BRHDRQ1 has a simple pulse width modulation (PWM) controller with a frequency cap of 500kHz. This provides improved transient response and steady-state performance. The PWM controller features a low ripple and noise mode of operation which is suitable for providing clean power supply for sensitive applications. In addition, it features a programmable soft-start and a programmable current-limit.

The LP87332BRHDRQ1 can be used in a variety of applications such as automotive, industrial, consumer and battery operated products. It can be used to provide fixed and adjustable output voltages and can be used as a step-down regulator to provide excellent load transient response and low ripple and noise.

In terms of its working principle, the LP87332BRHDRQ1 uses a power MOSFET to regulate the output current to a constant level. The power MOSFET is operated by a PWM circuit. The PWM circuit controls the on-time of the device, which is proportional to the output voltage. The output voltage can be adjusted by changing the PWM frequency of the PWM circuit.

The LP87332BRHDRQ1 features an input current limit circuit, which limits the device from drawing too much current from the input. This ensures that the device does not overload and protects it from over-current conditions. In addition, the LP87332BRHDRQ1 has a built-in over-temperature protection circuit that reduces the output current when the temperature exceeds a certain threshold.

The LP87332BRHDRQ1 also has an integrated power-on reset (POR) circuit and an adjustable current limit feature. The POR circuit is used to avoid startup issues while the current limit feature allows the user to select the amount of current needed for safe operation.

Overall, the LP87332BRHDRQ1 is an ideal choice for applications that require a high performance step-down DC-DC converter. It is optimized for automotive applications and uses a fixed 5V reference voltage for efficient and low-noise operation. In addition, it has numerous protection features and can be used for providing voltage and current regulation for a variety of devices.

The specific data is subject to PDF, and the above content is for reference