LTC4210-4IS6#TRPBF

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Power management integrated circuits (PMICs) are used to control and reduce power consumption in a variety of applications. The LTC4210-4IS6#TRPBF is one such PMIC, specifically designed for Hot Swap Controllers (HSCs). It is used in many applications to provide reliable hot swapping of power and adjunct circuits from mid-voltage I/O systems and many supply voltages.

The LTC4210-4IS6#TRPBF application field comes from its ability to monitor the input supply voltage and limit the current in the load circuit during hot swapping. The design of the HSC controller allows separate outputs for power control, protection, and supervision. This provides protection to the connected circuit, while allowing it to be safely inserted or removed without interruption.

The LTC4210-4IS6#TRPBF puts the positive supervisory power supply input (VIN1) in series with the output supply voltage in the load paths. VIN0 is in series with the input connector to detect any current flow. During hot swap, VIN1 is lower than VOUT, preventing any input current from entering the load circuit. Once VIN1 reaches the same voltage as VOUT, the hot swap controller is activated, allowing the current to flow. A dedicated overcurrent protection feature then prevents any inrush current from exceeding the pre-determined limit.

The working principle of the HSC controller is one of voltage monitoring and current limiting. Within the LTC4210-4IS6#TRPBF, an integrated voltage clamp (IVC) circuit monitors the input supply voltage and limits the current from the load circuit. The voltage threshold set on the IVC circuit determines the voltage at which the current inside the load circuit is allowed to reach its maximum level. Once the voltage exceeds this threshold, the current is limited to a set value, as determined by the user.

The LTC4210-4IS6#TRPBF also features a wide range of other features, including a high peak current limit, over-temperature protection, output voltage monitoring, and other features that ensure safe hot swapping of the input and output sides. With its robust design, the LTC4210-4IS6#TRPBF can be used in a variety of applications, from industrial hot swap applications to consumer electronics.

In summary, the LTC4210-4IS6#TRPBF is a PMIC designed for Hot Swap Controllers. It provides protection to the connected circuit, while allowing it to be safely inserted or removed without interruption. It uses voltage monitoring and current limiting, which is determined by a voltage threshold. With its robust design, the LTC4210-4IS6#TRPBF can be used in a variety of applications, from industrial hot swap applications to consumer electronics.

The specific data is subject to PDF, and the above content is for reference