LTC4215IUFD#PBF

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

LTC4215IUFD#PBF is a hot swap controller used for monitoring and control system for board-level hot swap applications. As the power provided to printed circuit boards (PCBs) associated with a system increases, the circuit boards must be able to exceed the maximum current and prevent overload damage. The LTC4215 will allow PCBs to be connected to a power supply without causing a load surge, thus making it ideal for protecting against overcurrent, overvoltage, and over temperatures in PC boards. The LTC4215IUFD#PBF is extremely small and can be used in a wide range of applications.

In terms of package, the LTC4215IUFD#PBF is a 10-pin 3mm x 3mm surface mount DFN with a thermal pad. It is a very small package and can be mounted directly to a PCB. Its maximum operating temperature range is -40°C to 85°C. This allows it to be used in a wide variety of applications that involve extreme temperatures.

The LTC4215IUFD#PBF has two primary components: a controller and a power switch. The controller relies on a voltage sense input and a current sense input to monitor the current and voltage of the system. If an overvoltage or overcurrent condition is detected, the controller will disable the power switch and shut down the system. The controller also provides a general purpose IO pin, a power good signal, an undervoltage lockout signal, and an overcurrent cutoff signal.

The power switch is responsible for turning the power to the load on and off. It is a high-performance power MOSFET with a very low RDSon, making it ideal for applications with high intensity loads such as processor cores, FPGAs, etc. It also has fast over-current protection and a very low leakage current.

The LTC4215IUFD#PBF is ideal for hot swap applications, where the power must be disconnected and reconnected without causing damage to the load. It provides the flexibility to reduce the PCB size and minimize design cycle time, while meeting stringent safety and reliability requirements. Additionally, its minimal power loss and low EMI makes it ideal for a wide range of applications.

In conclusion, the LTC4215IUFD#PBF is a hot swap controller used to provide a simple and effective way to protect against overcurrent, overvoltage, and over temperature conditions in PC boards. It is a very small package and can be used in a wide range of applications. Its features make it ideal for hot swap applications, allowing for rapid connection and disconnection of power to the load, minimizing design times and minimizing power losses.

The specific data is subject to PDF, and the above content is for reference