LTM4620IY

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC DC Converters are widely used in various industries for transforming and controlling the DC voltage and current. The LTM4620IY is a type of DC DC Converters, which is special designed for rugged and high temperature control system application. This device is featured with low current capability, low noise and wide operating temperature range from -40°C to 130°C.

Application Field of LTM4620IY

The LTM4620IY is a high-temperature, current mode, step-down DC DC converter. It is highly integrated and features a low-side MOSFET and an on-chip current sense amplifier. The device\'s maximum output current is above 6A and the switching frequency can reach up to 1MHz, which makes the LTM4620IY suitable for many applications with fast response time and high power density. It uses a current-mode control architecture with both discontinuous current mode (DCM) and the burst mode operation (BOM) protocols for reduced power consumption and high efficiency. The LTM4620IY has a regular voltage range of 3.0V to 28V and a low dropout voltage of 300mV, guaranteeing that there is enough voltage when the system is on standby mode. The LTM4620IY also features a voltage tracking capability that makes it compatible with various control scenarios such as automatically switching from battery to external power or tracking a nominal voltage of the system.

The LTM4620IY is highly recommended for industrial applications such as automotive and avionics due to its robust design, wide temperature range and high-performance features. It is suitable for battery-powered modules, LED drivers, data converters, embedded systems and power supplies that need a fast response, high-power density and longer operating time.

Working Principle of LTM4620IY

The LTM4620IY is a monolithic step-down DC DC converter that uses the current-mode control topology. It is an integrated circuit with on-chip switches low-side MOSFETs, and integrated current-sense amplifier. The operating principle of the device is based on the concept of synchronous buck converter and by using two switches alternately, the stored energy in an inductor is transferred to the output voltage in a controlled manner.

When the internal switch is high, the switch conducts current from the input to the output and charges the output capacitance load. The synchronous duration is dependent on the measured inductor current, which is realized by the internal current sense amplifier. As soon as the current value reaches its reference, the internal switch is switched off and the current flows from the inductor to the output capacitance load.

To ensure current-mode control, the sense amplifier samples the sensed inductor current. The output voltage is compared to the reference voltage and an error signal is generated. The current-mode control block is responsible for the generation of an error signal, which is then multiplied by a gain factor and the resulting control signal is used to control the MOSFETs. The control loop is stable for a certain range of output capacitances. The low-side MOSFET absorbs the stored energy in the inductor while the high-side MOSFET transfers the energy to the output load.

To achieve high efficiency, the LTM4620IY features the burst-mode operation (BOM) and the discontinuous current mode (DCM). Both BOM and DCM are device settings that enable the device to reduce power consumption and enhance efficiency when the output load is low. In BOM, the internal switch can be turned off after the inductor current reaches the reference point. When the device is in DCM, the internal switch is turned off when the inductor current reaches zero.

The main design goal of the LTM4620IY is to maximize the energy utilization efficiency while providing fast response and high power density. The device can operate over a wide input voltage range with minimum power dissipation even at light load conditions, all of which make LTM4620IY a valuable choice for high temperature control system applications.

The specific data is subject to PDF, and the above content is for reference