MAX13488EESA+

Series:	--
Packaging:	Tube
Part Status:	Active
Type:	Transceiver
Protocol:	RS422, RS485
Number of Drivers/Receivers:	1/1
Duplex:	Half
Receiver Hysteresis:	25mV
Data Rate:	16Mbps
Voltage - Supply:	4.75 V ~ 5.25 V
Operating Temperature:	-40°C ~ 85°C
Mounting Type:	Surface Mount
Package / Case:	8-SOIC (0.154", 3.90mm Width)
Supplier Device Package:	8-SOIC
Base Part Number:	MAX13488E

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

MAX13488EESA+ Application Field and Working Principle

The MAX13488EESA+ is an interface IC in the broad category of drivers, receivers, transceivers. This chip is often used in applications like security and access control projets, consumer electronics, and measurement and instrumentation. Not only is the MAX13488EESA+ a powerful interface IC, it also has a wide range of operating temperatures, being able to operate in temperature ranges between -40°C and +85°C.The MAX13488EESA+ has built-in drivers to allow all five I/O pins on the chip to both drive and detect line-level signals. This makes the MAX13488EESA+ useful for applications that require their input and output to be compatible with signals from other devices. The MAX13488EESA+ also has a built-in highly sensitive Schmitt-trigger type logic receiver to detect polarity and an open-drain output with active-high enable pin to detect logic high or logic low states. The MAX13488EESA+ works by outputting a current value that is proportional to the applied input voltage. When a voltage is applied to the input terminal, the output current is determined by the input voltage, the output DC bias current, and the offset voltage of the circuit. The maximum DC bias current is set to 1nA, and the maximum offset voltage is set to 0.5 mV. This ensures that the output current has very low jitter and is highly linear.The MAX13488EESA+ is ideal for use in applications that require high speed, low jitter, and high accuracy. Its low jitter ensures that the output current can react to changes in the input voltage quickly and accurately. Its high accuracy ensures that the output current is always proportional to the input voltage, regardless of any fluctuations in the power supply.The MAX13488EESA+ also features a wide range of switches, including a “black” switch, lockable switches, and pull-up and pull-down switches. The “black” switch allows the internal logic to control the outputs of the MAX13488EESA+, while the lockable switches can be used to prevent accidental changes to the I/O pins. The pull-up and pull-down switches can be used to set the logic state of the I/O pins, and the pull-up switch can be used to input a logic high or logic low state to the I/O pins.The MAX13488EESA+ also offers a number of protection features. Its built-in electrostatic discharge (ESD) protection helps to protect the device from ESD events as well as from overvoltage conditions. The ESD protection works by clamping the voltage on the I/O pins to a pre-defined voltage value. Additionally, the MAX13488EESA+ also has failsafe protection, which prevents incorrect logic levels from being outputted by the device, as well as thermal shutdown protection, which shuts the device down in the event of an over-temperature condition.Overall, the MAX13488EESA+ is an extremely versatile device. Not only is it a powerful interface IC, but it also has a wide range of operating temperatures, low jitter and a wide range of protection features, making it an ideal choice for a variety of applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description