MAX1090BEEI+

Number of A/D Converters:	1
Base Part Number:	MAX1090
Supplier Device Package:	28-QSOP
Package / Case:	28-SSOP (0.154", 3.90mm Width)
Operating Temperature:	-40°C ~ 85°C
Features:	--
Voltage - Supply, Digital:	2.7 V ~ 5.5 V
Voltage - Supply, Analog:	5V
Reference Type:	External, Internal
Architecture:	SAR
Series:	--
Ratio - S/H:ADC:	1:1
Configuration:	MUX-S/H-ADC
Data Interface:	Parallel
Input Type:	Pseudo-Differential, Single Ended
Number of Inputs:	4, 8
Sampling Rate (Per Second):	400k
Number of Bits:	10
Part Status:	Active
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

Data acquisition is a process in which information is converted from analog signals to digital signals. Analog to Digital Converters (ADCs) are commonly used in this process. The MAX1090BEEI+ is an 8-bit, single-layer, programmable logic integrated circuit with a clock frequency of 120MHz and output sampling rate of up to 1.92MS/s. In this article, the application field and working principle of the MAX1090BEEI+ will be discussed.

Application Field

The MAX1090BEEI+ is designed to be used in a variety of applications, such as signal processing, medical imaging, motion tracking, or automotive applications. It is suitable for tasks such as data acquisition, signal conditioning, signal generation, and signal regeneration.The MAX1090BEEI+ is ideal for applications where precise measurements and accuracy are essential, as it boasts an impressive signal-to-noise ratio of 60dB. The ADC can accurately measure signals up to a bandwidth of full-scale differential input of 9MHz, which is suitable for high-bandwidth applications. In addition, the MAX1090BEEI+ features a low-power mode, which can be activated when the load is low, which helps to save energy and reduces costs.

Working Principle

The MAX1090BEEI+ is a single-layer programmable logic integrated circuit. It consists of an input buffer, a clock generator, a digital filter, a decimator and an output buffer, as well as a digital controller.When an analog signal is applied to the input buffer, it is then sent to the clock generator, which generates the clock signals necessary for the digital filter to process the signal. The digital filter processes the analog signal and passes the data to the decimator where it is converted to its digital equivalent. The digital signal is then sent to the output buffer, which converts it to its original form, before finally being sent to the digital controller. The digital controller then processes the data and sends it to the appropriate output device.

Conclusion

The MAX1090BEEI+ provides an ideal solution for applications where precise measurements are necessary, as it offers an impressive signal-to-noise ratio of 60dB and a full-scale differential input of 9MHz. It can be used in a variety of applications, from signal processing to medical imaging, and the low-power mode helps to reduce costs. The MAX1090BEEI+ is a single-layer programmable logic integrated circuit, consisting of an input buffer, clock generator, digital filter, decimator and output buffer, as well as a digital controller. It converts analog signals to digital signals with high accuracy and precision.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description