MAX16814AUP/V+T

The MAX16814AUP/V+T is classified as an LED driver belonging to the larger PMIC (Power Management Integrated Circuit) category. The device is designed for delivering a regulated constant current for LED lighting in applications such as automotive headlamps, daytime running lamps, and display backlighting. It is used to power as many as four LED channels from digital logic or PWM control signals. This LED driver is also capable of handling various combinations of LED packages and current levels. The device is well-equipped to provide full protection against thermal and electrical overloads.The MAX16814AUP/V+T\'s application field is diverse, ranging from automotive headlights and daytime running lamps to display backlighting and general-purpose LED lighting fixtures. It can be used in applications such as: - Automotive exterior lighting, including headlamps, turn signals, fog lights, and brake lights - Interior lighting applications, such as footwell lighting and dome lighting - Display backlighting, as well as general-purpose LED lighting fixtures.The working principle of the MAX16814AUP/V+T revolves around five main components- an input voltage, a main output MOSFET, a current sense resistor, a voltage regulator, and the MAX16814AUP/V+T itself. When the input voltage is applied, it passes through the main output MOSFET, which acts as the primary switch. The current also flows through the current sense resistor, which functions as the reference for the electronics current control stage. The MAX16814AUP/V+T itself is designed with a control loop architecture, consisting of an open loop voltage regulator, plus a closed loop current control stage, enabled by a charge pump. The voltage regulator is used to provide stable and symmetric condition, setting the voltage across the current sense resistor. Then, the current control stage, which works in closed loop, adjusts the output current by modulating the PWM signal on the MAX16814AUP/V+T\'s gate signal pin, and thus, it is what enables the device to regulate the current delivered to the LED. When the LED current reaches its predetermined value, the device either reduces or increases the PWM duty cycle signal, thereby regulating the LED current. This ensures that the LED current is always regulated even in the presence of variations in the line and load conditions. In addition to its primary functions, the MAX16814AUP/V+T also has additional protection features enable higher reliability and better performance. Firstly, it has over-temperature protection and under-voltage lockout (UVLO) protection, to protect both the device itself and the LEDs from overheating or under-voltage conditions. Additionally, the device has over- and under-current protection features, to ensure the safety of the LEDs under over- or under-current conditions. In short, the MAX16814AUP/V+T is a powerful device designed for delivering a regulated constant current for LED lighting applications. It can be used for various types of applications, from automotive headlights and interior lighting to display backlighting and general-purpose LED lighting fixtures. With its efficient control loop architecture and additional protection features, the MAX16814AUP/V+T is the ideal choice for LED lighting applications.

The specific data is subject to PDF, and the above content is for reference