MAX1723ELT+T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The MAX1723ELT+T is a DC-DC switching regulator that has many potential applications for a wide range of uses depending on the individual design requirements. This chip, also known asMAX1723ELT+T, is a low-noise, high-efficiency, monolithic step-down DC-DC converter with a wide range of input voltage capability, adjustable current limit, and a shutdown feature. It provides an output voltage that can be adjusted to any level between 0.75V and 2.5V typical using an external resistor divider. This makes it well suited for a variety of applications.

The MAX1723ELT+T is a switching regulator with a wide input and output range, which makes it a great choice for applications that require a wide voltage range. It has an active low enable input (EN), a PWM input (PWM), and an adjustable current limit and output current sense. The enable input is used to turn the chip on and off, while the PWM input is used to control the switching frequency of the device. The current limit is adjustable by an external resistor, and the output current sense is used to adjust the current limit.

This DC-DC switching regulator operates in a pulse width modulation (PWM) mode, where the input voltage is regulated by the switching frequency of the device. The switching frequency is determined by the PWM input and the EN input. The current limit is adjustable by changing the voltage on the current sense pin. When the current limit is exceeded, the device will trip and shut down the output, preventing further damage to the chip.

The MAX1723ELT+T is a low-noise, high efficiency DC-DC switching regulator that is capable of delivering regulated output voltages from 0.75V to 2.5V. It has an input voltage range of 3.2V to 6V, allowing it to work with a wide range of input voltages. It also has fast transient response and a low output ripple of <50mV. It can operate with a switching frequency of up to 3MHz, providing fast response time and low noise operation.

The MAX1723ELT+T is a cost effective solution for a wide range of applications. It has a low supply current of only 6μA when enabled, and a low thermal resistance of only 0.59°C/W. It is also capable of delivering up to 2A of output current, and it can handle up to 16V of input voltage. This makes it well suited for applications such as portable batteries, smart phones, GPS receivers, and low-power systems.

The MAX1723ELT+T is a highly efficient and reliable DC-DC switching regulator that is suitable for a wide range of applications. It has a wide input voltage range, fast transient response, and low noise operation. Its adjustable current limit and output voltage make it a cost-effective solution for many applications. It is capable of delivering up to 2A of output current, making it a great choice for portable batteries, smart phones, GPS receivers, and low-power systems.

The specific data is subject to PDF, and the above content is for reference