MAX17559EVKIT#

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Evaluation Boards - DC/DC & AC/DC (Off-Line) SMPS is in a category of circuitry mainly for transforming a voltage level to another. In this category, the MAX17559EVKIT# is an integrated circuit for controlling output voltage of various AC/DC and DC/DC power supplies.The application of the MAX17559EVKIT# is generally for offline AC/DC and DC/DC applications with an input range from 60VAC to 400VAC or from 4V to 28V DC. It is suitable for driving LEDs, as well as battery charging, and can provide a maximum output for about 1.5A. It allows optimized current sharing with various shunt topology layouts.The MAX17559EVKIT# includes a linear regulator, PWM controller, current sense and slew rate control circuitry, which together control the burst mode operation of the kit. The addition of a secondary winding on the transformer also adds to the security of the system. The transformer also provides additional isolation and protection for the system.Operating frequency of the MAX17559EVKIT# is programmable with digital control and can be set between 500kHz and 2.6MHz, with a maximum output of 70W. It also features integrated fault protection, including an over voltage monitor, output voltage monitor, temperature monitor, output short circuit protection, and inrush current limiting.The MAX17559EVKIT# also operates in pulse-width modulated (PWM) mode, and can be set for continuous-conduction mode (CCM) or discontinuous-conduction mode (DCM). It features a low quiescent current of 600μA for higher efficiency, as well as low input capacitance for better power-line pollution. It also has an internal synchronous rectifier for enhanced efficiency, as well as programmable shutdown and cycle-by-cycle overload protection for higher reliability.The overall working principle of the MAX17559EVKIT# is to take an AC input voltage, typically 60VAC to 400VAC, and convert it into a useable DC voltage. This is done using a transformer, which steps down the input voltage and provides isolation, as well as additional protections against overloads, surges, and shorts. A rectifier receives the output from the transformer and then rectifies into a usable DC voltage, which is then filtered and regulated by the MAX17559EVKIT#, to the desired output voltage as set by the user.The MAX17559EVKIT# can be used in a wide range of applications, including isolated LED lighting drivers, off-line battery chargers, and any other AC/DC or DC/DC power conversion circuit. This evaluation kit is well suited to prototyping and designing such power conversion circuits, and is sure to make your design process simpler and quicker.

The specific data is subject to PDF, and the above content is for reference