MBR60045CT

Series:	--
Packaging:	Bulk
Part Status:	Active
Diode Configuration:	1 Pair Common Cathode
Diode Type:	Schottky
Voltage - DC Reverse (Vr) (Max):	45V
Current - Average Rectified (Io) (per Diode):	300A
Voltage - Forward (Vf) (Max) @ If:	750mV @ 300A
Speed:	Fast Recovery = 200mA (Io)
Current - Reverse Leakage @ Vr:	1mA @ 20V
Mounting Type:	Chassis Mount
Package / Case:	Twin Tower
Supplier Device Package:	Twin Tower

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

MBR60045CT Application Field and Working Principle

Diodes are widely used in a variety of electronic systems, with the most common applications being in power conversion and signal conditioning. The application field and working principle of an MBR60045CT, a rectifier array, is one of the most important of these application fields.Rectifier arrays, or rectifiers, are used mainly in power converters - from a low direct current (DC) to a higher direct current (DC). In a rectifier array, several diodes in series or in parallel configurations form the rectifying element. The MBR60045CT is a high-reliability array of six high-performance diodes that can be used for both bridge and center-tapped configurations. The working principle of the MBR60045CT is based on the four basic characteristics of a diode, namely forward voltage drop, reverse-recovery time, reverse-bias safe operating area (RBSOA) and reverse-blocking voltage. The forward voltage drop is the voltage across the diode that opposes the flow of current in the forward direction. Reverse-recovery time is the amount of time it takes for the diode to allow current to flow in the reverse direction after the forward current ceases. The RBSOA defines the voltage-current area of operation for the diode - beyond which the diode will suffer permanent damage. Finally, the reverse-blocking voltage defines the maximum reverse-bias voltage that the diode can withstand before it fails. The MBR60045CT has an average current of 6.0A and an average surge current of 10.0A, making it suitable for both high-reliability power converters and power converters with moderate power needs. The diode has a reverse-blocking voltage of 600V and a forward voltage drop of 0.45V, making it suitable for applications with a relatively high forward voltage drop. Its reverse-recovery time is 6.0 nanoseconds and its reverse-bias safe operating area (RBSOA) is 150 µA. The MBR60045CT can be used in both single- and dual-phase rectification applications. In single-phase rectification, just one diode is used in the circuit to create winding current during the negative half of the supply voltage. In dual-phase rectification, two diodes are used in the circuit - one to create a positive voltage and the other to create a negative voltage. The dual-phase rectification method is used in applications where the requirement is for high efficiency and power conversion results. Finally, the MBR60045CT can be used in automotive, industrial, domestic and telecommunications applications due to its high-reliability and low-cost. The array of diodes can be used to provide clean, efficient and reliable power for a wide range of applications, from motor drivers to LED discharge lamps. Overall, the MBR60045CT is a cost-effective and reliable rectifier array that can be used in a variety of power conversion and signal conditioning applications. It has a reverse-blocking voltage of 600V and a forward voltage drop of 0.45V, and its reverse-recovery time and RBSOA are 6.0 nanoseconds and 150 µA, respectively. Finally, the MBR60045CT allows for single- and dual-phase rectification and is suitable for automotive, industrial, domestic and telecommunications applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description