MBR60100CT

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes are components used to move electric current through a circuit, commonly in a single direction. These are necessary to overcome the difference in potential caused by resistance in the circuit. Rectifiers are diodes used to convert alternating current (AC) to direct current (DC). Arrays of diodes are used to create even more complex electrical pathways to direct power. One example is the MBR60100CT, an array of high power, two-terminal Schottky rectifiers mainly intended for high power rectification purpose in advanced switching power supplies.

The MBR60100CT is designed for high current output applications, with an average output current up to 150 Amperes. It can have continuous forward current of 100 Amperes and a peak non-repetitive surge current of 600 Amperes. With a peak reverse voltage of 600 Volts and an operating temperature range of -55°C to 150°C, the MBR60100CT has a wide range of applications in areas such as industrial, military, and telecom.

The main advantage of the MBR60100CT is its low forward voltage drop. When compared to a standard diode rectifier of the same current output, the Schottky diode used in the MBR60100CT has no reverse recovery time, which reduces power losses and increases the overall efficiency of the circuit. Furthermore, the MBR60100CT has a very low total capacitance, which provides for improved switching frequency performance and better transient responses.

In addition to its low voltage drop, the MBR60100CT also offers an improved thermal performance compared to other rectifiers. Its thermal performance is due to the low stored charge and a more efficient thermal dissipation system. This ensures that the device is reliable and operates at an enhanced tensile strength even at high temperature.

The working principle of the MBR60100CT is simple. The rectifier is connected in the circuit so that its anode is connected to the positive terminal and its cathode is connected to the ground. When a positive DC supply is applied to the circuit, the Schottky diode begins to conduct, allowing current to flow in one direction. It will block current from flowing in the other direction, thus preventing feedback from the load current back into the source.

The MBR60100CT is an ideal choice for applications that require high current and low voltage drop. It is designed for high power rectification applications such as industrial and military power supplies, telecom, automotive, and other applications that require high current. With its low forward voltage drop and excellent thermal performance, the MBR60100CT is sure to be a reliable and long-lasting rectifier.

The specific data is subject to PDF, and the above content is for reference