MC10H124MELG

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The MC10H124MELG, classed as a logic translator, level shifter, is primarily used to convert digital signals in a variety of applications. In particular, it is employed in the translation of digital signals from one voltage level to another. As an example, it may be used to convert a 5 volt logic level signal to a 10 volt logic level signal, or vice versa.

It is commonly used in many applications, including consumer electronics, communications, and instrumentation. The MC10H124MELG is exceptionally small and highly efficient, which makes it very attractive for use in space-constrained circuit designs. In addition, its low power consumption helps to reduce power consumption and increase system reliability.

The MC10H124MELG operates in one of three modes, depending on the voltage applied to the Mode Control pin (MC). If MC is in the HI voltage state (greater than 1.164V), the device operates in the High-to-Low Voltage Translation mode. Here, a logic level signal at one voltage is translated to a logic level signal at a lower voltage. When MC is in the LO voltage state, the device operates in Low-to-High Voltage Translation mode, delivering a logic level signal of a higher voltage. Finally, in the middle state of MC, the MC10H124MELG operates in High-to-High Voltage Translation mode, which is useful for maintaining the same voltage level.

The operation of the MC10H124MELG is through the use of two interlocked CMOS switches. The two-phase clock signals (Ph1 and Ph2) toggle the corresponding switch positions. They also control the voltage levels of the Output Pin (OP). Both input and output signals must be in the same logic level family in order to maintain the correct voltages at both ends. The two signals must be provided in a complimentary manner (i.e., Ph1 High-Low-High and Ph2 Low-High-Low) to ensure the correct levels are maintained.

Furthermore, the MC10H124MELG contains an open-drain output feature. This feature allows the device to be employed in special applications, such as logic levels dual translation, by connecting the output pin to an external resistor. With the open-drain output feature, the output pins can be configured to remain in a Low-State, High-State, or Float-State, thereby providing the versatility required for many applications.

The MC10H124MELG logic translator, level shifter is a versatile and powerful device for inter-signal voltage translation. Its ability to alter voltage signals from one level to another makes it ideal for myriad applications, from consumer electronics to instrumentation. This device, thanks to its low power consumption, small size, and flexibly open drain output, is suited for circuit designs that require both reliability and economy.

The specific data is subject to PDF, and the above content is for reference