MC33493ADTBER2 RF/IF and RFID

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

RF Transmitters are a type of radio frequency (RF) device that is used to send data, information, and power from one point to another. The most common of these are cell phones, radio and television transmitters, radar transmitters, wireless modems, and satellite systems. MC33493ADTBER2 is a feature-rich transmitters with integrated controller, boost regulator, negative channel driver, PLL and power amplifier for wireless communication and mobile phones.

Application Field

MC33493ADTBER2 is widely used in a variety of consumer electronic products, including Bluetooth applications, mobile phones, and other wireless communications systems. It is a highly integrated booster with low power consumption and high efficiency. In addition, the transmitter also features band-gap reference, PLL synthesizer, low-power mode, low external component count, temperature compensation, and 8-bit DAC voltage. It also uses a charge pump voltage booster to guarantee efficient power boost with low current draw under high load conditions. This type of transmitter is an ideal choice for portable and low-power applications requiring high efficiency with very low noise figures.

Working Principle

MC33493ADTBER2 is a three-stage voltage booster circuit that converts low voltage, low current AC or DC power into regulated, high current DC power. The voltage boost circuit is composed of a preamplifier, an amplifier, and a charge pump voltage booster. The preamplifier amplifies the input signal from the low voltage source to the appropriate level for the amplifier to accurately reproduce the signal. The amplifier is connected to the load, and the output voltage and current levels are determined based upon the load resistance. The charge pump voltage booster utilizes the inherent properties of capacitors and inductors to increase the voltage output of a DC power supply while still maintaining high efficiency. Once the high voltage DC power is obtained, it is used to supply power to the device’s RF transmitter.

The transmitter essentially takes the low voltage AC or DC input and modulates it in order to send encoded data via RF waves. The RF waves are propagated through the medium, and the receiver picks up the signal’s amplitude, frequency, and phase. The encoded data is then decoded and passed onto the output of the receiver.

The MC33493ADTBER2 transmitter is a feature-rich radio frequency device that can be used in a variety of applications. With its integrated controller, boost regulator, negative channel driver, PLL and power amplifier, the transmitter is designed to send signals over a wide range of frequencies with very low power consumption and high efficiency. It is an ideal choice for portable and low-power applications requiring high transmission performance.

The specific data is subject to PDF, and the above content is for reference