Series:	--
Packaging:	Tape & Reel (TR)
Part Status:	Obsolete
Voltage - Off State:	600V
Voltage - Gate Trigger (Vgt) (Max):	1V
Current - Gate Trigger (Igt) (Max):	15mA
Voltage - On State (Vtm) (Max):	1.8V
Current - On State (It (AV)) (Max):	5.1A
Current - On State (It (RMS)) (Max):	8A
Current - Hold (Ih) (Max):	30mA
Current - Off State (Max):	10µA
Current - Non Rep. Surge 50, 60Hz (Itsm):	80A @ 60Hz
SCR Type:	Standard Recovery
Operating Temperature:	-40°C ~ 125°C
Mounting Type:	Surface Mount
Package / Case:	TO-252-3, DPak (2 Leads + Tab), SC-63
Supplier Device Package:	DPAK
Base Part Number:	MCR8

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Thyristors are a type of solid-state semiconductor components. They are used in many applications, such as power conversion and power control. A particular type of thyristor is the Silicon Controlled Rectifier, or SCR. The SCR, when added to an electrical circuit, makes it possible to control large amounts of power with just a tiny amount of current. The MCR8DCMTM is a type of SCR that can be used in applications such as power control and switching, as well as communication equipment.The MCR8DCMTM is a 4-pin, 400V, 4A SCR device. It has two Anode pins that are connected to the source of current and two Gate pins that are connected to the control circuit. The device can be used in different types of electrical circuits, depending on the type of control desired and the power supply characteristics.When current flows through the Anode pins, it creates a small voltage difference between the Anode and Gate pins. This voltage difference is referred to as the Gate Trigger Voltage (GTV). When this GTV exceeds the SCR\'s holding voltage, the SCR is then triggered and allows current to flow from the Anode to the Cathode. The current flow is controlled by the Gate voltage.The MCR8DCMTM SCR is typically used in switching and power control applications. It can be used to regulate the current in an electrical circuit, allowing it to be turned on or off at specific times. It can also be used in communication equipment, in order to switch signals when needed. The MCR8DCMTM has several distinct advantages over other SCRs. First, it has a lower on-state voltage drop, allowing it to operate at higher frequencies with less power loss. It also has a fast turn-on and turn-off time, which makes it well suited for controlling communications signals. Finally, its low gate current requirements make it ideal for applications where the control circuit needs to be simple and inexpensive. The MCR8DCMTM is a versatile and reliable SCR device, and it has many applications in many different industries. It is well suited for use in power control and switching applications, as well as in communication equipment. Its fast turn-on and turn-off times, low gate current requirements and low on-state voltage drop make it an ideal solution for a variety of applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description