MCR8DSNT4G

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Thyristors are a semiconductor device with three or more terminals. A thyristor can be used as a switch, to control current either for protection or for other needs. The most commonly used thyristor is the Silicon Controlled Rectifier (SCR), which is a three-terminal and four-layer device. The SCR or Thyristor is suited for AC line power and motor control operations, and thus is widely used in power electronics circuits. The performance of an SCR can be seen in the application where the current must be switched fast and safely. A typical Thyristor can switch hundreds of amperes of alternating current.

The MCR8DSNT4G is a 4-pin 500V SCR Thyristor. It is a surface-mount device, which utilizes a high-temperature processing, and provides a gate control signal with a minimum energy for a highly reliable operation. The MCR8DSNT4G is suitable for fast switching applications, such as light dimming, soft starter, and power factor correction. It is capable of controlling direct current (DC) of up to 500 volts and up to 8switching cycles per second in AC operation.

The MCR8DSNT4G is designed with a high breakdown voltage, low on-state voltage drop, high capability to handle large inrush current, and low gate insensitivity. It is also suitable for high frequency switching in remote control systems, security systems, and arc welding.

The MCR8DSNT4G features a Gate Controlled Thyristor (GCT), which provides an easier operating way than other thyristors. A GCT is an improved version of SCR, which allows the gate current to remain constant for a specified period of time. This ensures that a steady state current can be switched efficiently and with minimal energy consumption. This is a very efficient way of switching, which leads to a less expensive device and much improved current switching performance.

The working principle of the MCR8DSNT4G is largely dependent upon the gate control mechanism, where the device is triggered at a predefined voltage or current. The MCR8DSNT4G utilizes a low-on-state voltage drop with a low forward and reverse recovery time. This device eliminates the need for power supplies to control the SCR, allowing it to switch efficiently with minimal energy consumption. As it is fully integrated with the trigger logic, MCR8DSNT4G allows automatic switching and current control.

The MCR8DSNT4G is widely used in power supplies and industrial applications, such as high-power rectification, motor control, lighting control, relay protection and home automation. In addition, it can be employed in high speed and low frequency switching applications, such as welders, arc furnaces, UPSs and other pulse-control systems.

In conclusion, the MCR8DSNT4G is a highly efficient SCR Thyristor comprising a Gate Controlled Thyristor (GCT) for fast switching in high current applications. With its low on-state voltage drop, high breakdown voltage and low gate insensitivity, MCR8DSNT4G provides simple and reliable operation in a wide array of applications, including industrial process control, motor control, lighting control and home automation.

The specific data is subject to PDF, and the above content is for reference