MIC4127YMME-TR Integrated Circuits (ICs)

Logic Voltage - VIL, VIH:	0.8V, 2.4V
Base Part Number:	MIC4127
Supplier Device Package:	8-MSOP-EP
Package / Case:	8-TSSOP, 8-MSOP (0.118", 3.00mm Width) Exposed Pad
Mounting Type:	Surface Mount
Operating Temperature:	-40°C ~ 125°C (TJ)
Rise / Fall Time (Typ):	20ns, 18ns
Input Type:	Non-Inverting
Current - Peak Output (Source, Sink):	1.5A, 1.5A
Series:	--
Voltage - Supply:	4.5 V ~ 20 V
Gate Type:	N-Channel MOSFET
Number of Drivers:	2
Channel Type:	Independent
Driven Configuration:	Low-Side
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to PMIC - Gate Drivers: What is MIC4127YMME-TR?

A Power Management Integrated Circuit (PMIC) is an integrated circuit (IC) that is used to provide power control functions to a system. PMICs can include a number of different sub-circuits, including DC-to-DC converters, voltage regulators, load switches, and thin-film transistors (TFTs). PMICs are typically used in consumer electronics and embedded systems. Gate drivers are analog or digital integrated circuits (ICs) used to operate and control the gate of a MOSFET or IGBT in a power-control circuit. Gate drivers are typically used in DC-DC conversion, switch-mode power supplies, and motor drivers.The MIC4127YMME-TR IC is a pulse-width-modulated (PWM) gate driver from Microchip Technology. The MIC4127YMME-TR is designed to drive the large on-off ratios of an IGBT, allowing for greater control and efficiency of power conversion circuits. The IC features an integrated gate driver and protection circuit, allowing for a wide range of regulated IGBT driving applications.

Application Fields for the MIC4127YMME-TR

The MIC4127YMME-TR is designed for a wide range of applications, including: motor speed control, power switching, energy conversion control, and power supply design. This IC can be used in many types of DC-to-AC and AC-to-DC power conversion circuits. These circuits can include motor control, power factor correction (PFC) and switched-mode power supplies (SMPS).The MIC4127YMME-TR is often used to control the speed of motors in machines and appliances, as well as to regulate electrical power conversion in wind turbines and solar energy systems.The MIC4127YMME-TR is ideal for applications where space is limited, as it combines the gate drive, protection circuit, and sense pin into one small package. The IC is designed to be used with either N-channel or P-channel IGBTs and has an overcurrent protection circuit with a deglitch delay of up to 1ms. This makes it ideal for applications where high current is drawn from a limited source, such as solar battery systems.

Working Principle of the MIC4127YMME-TR

The MIC4127YMME-TR is a pulse width modulated (PWM) digital IC. It receives a PWM control signal, decodes it, and then controls the gate voltage of a power MOSFET or IGBT in order to achieve the desired output. The circuit can be used to control the power transfer between a power source and the load.The PWM signal is received from the controller. The controller generates the PWM waveform with the corresponding duty cycle to determine the desired power transfer from the power source to the load. The pulse width modulated (PWM) waveform is applied to the gate of the power MOSFET/IGBT. The MIC4127YMME-TR IC takes the PWM waveform as an input, then amplifies it, decodes it, and then outputs an analogous voltage to the gate of the power transistor. The gate voltage, in turn, controls the power transfer between the power source and the load. The MIC4127YMME-TR also uses a unique performance protection circuit to ensure that the power transistor is not damaged during operation. The protection circuit is designed to monitor the junction temperature and the current flowing through the MOSFET/IGBT. The protection circuit then provides additional gate drive, if necessary, to reduce the temperature and prevent the MOSFET/IGBT from being damaged.

Conclusion

The MIC4127YMME-TR from Microchip is a powerful gate driver IC designed for a variety of motor speed control, power switching, and energy conversion control applications. The IC combines the gate driver and protection circuit in a single package and is designed to be used with either N-channel or P-channel IGBTs. The IC takes a PWM waveform as an input, amplifies it, and then outputs a voltage proportional to the input waveform to the gate of the MOSFET/IGBT. The IC also features an integrated protection circuit that provides additional gate drive when necessary to prevent damage due to high temperature or current.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description