MKE02Z16VLD4

Due to market price fluctuations,if you need to purchase or consult the price.You can contact us or emial to us:   sales@allicdata.com

1. Description

The part number of the chip has a field that identifies a specific part. you can use it The values of these fields determine the specific part you have received.

2. Features

   1. Operating characteristics

       – Voltage range: 2.7 to 5.5 V

       – Flash write voltage range: 2.7 to 5.5 V

       – Temperature range (ambient): -40 to 105°C

   2. Performance

       – Up to 40 MHz ARM® Cortex-M0+ core and up to 20 MHz bus clock

       – Single cycle 32-bit x 32-bit multiplier

       – Single cycle I/O access port

   3. Memories and memory interfaces

       – Up to 64 KB flash

       – Up to 256 B EEPROM 

       – Up to 4 KB RAM

   4. Clocks 

       – Oscillator (OSC) - supports 32.768 kHz crystal or 4 MHz to 20 MHz crystal or ceramic resonator; choice of low power or high gain oscillators

       – Internal clock source (ICS) - internal FLL with internal or external reference, 31.25 kHz pretrimmed internal reference for 32 MHz system clock (able to be trimmed for up to 40 MHz system clock)

       – Internal 1 kHz low-power oscillator (LPO)

   5. System peripherals

       – Power management module (PMC) with three power modes: Run, Wait, Stop

       – Low-voltage detection (LVD) with reset or interrupt, selectable trip points

       – Watchdog with independent clock source (WDOG)

       – Programmable cyclic redundancy check module (CRC)

       – Serial wire debug interface (SWD)

       – Bit manipulation engine (BME)

   6. Security and integrity modules

       – 64-bit unique identification (ID) number per chip

   7. Human-machine interface

       – Up to 57 general-purpose input/output (GPIO)

       – Two up to 8-bit keyboard interrupt modules (KBI)

       – External interrupt (IRQ)

   8. Analog modules

      – One up to 16-channel 12-bit SAR ADC, operation in Stop mode, optional hardware trigger (ADC)

      – Two analog comparators containing a 6-bit DAC and programmable reference input (ACMP)

   9. Timers

       – One 6-channel FlexTimer/PWM (FTM)

       – Two 2-channel FlexTimer/PWM (FTM)

       – One 2-channel periodic interrupt timer (PIT)

       – One real-time clock (RTC)

  10. Communication interfaces

       – Two SPI modules (SPI)

       – Up to three UART modules (UART)

       – One I2C module (I2C)

  11. Package options

       – 64-pin QFP/LQFP

       – 44-pin LQFP

       – 32-pin LQFP

       – 32-pin QFN

3. Device pin assignment

4. ADC input impedance equivalency diagram

hot deals

LIS3DHTR           PMEG2005AEA/DG,115           MSP430F47177IPZ