MPS2907ARLRM

Series:	--
Packaging:	Tape & Box (TB)
Part Status:	Obsolete
Transistor Type:	PNP
Current - Collector (Ic) (Max):	600mA
Voltage - Collector Emitter Breakdown (Max):	60V
Vce Saturation (Max) @ Ib, Ic:	1.6V @ 50mA, 500mA
Current - Collector Cutoff (Max):	10nA (ICBO)
DC Current Gain (hFE) (Min) @ Ic, Vce:	100 @ 150mA, 10V
Power - Max:	625mW
Frequency - Transition:	200MHz
Operating Temperature:	-55°C ~ 150°C (TJ)
Mounting Type:	Through Hole
Package / Case:	TO-226-3, TO-92-3 (TO-226AA) (Formed Leads)
Supplier Device Package:	TO-92-3
Base Part Number:	MPS2907A

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

MPS2907ARLRM is a bipolartransistor, a type of electronic component which can be used to amplify and switch electronic signals and electrical power. It is one of the most common components in electronic circuits and can be used for a variety of applications.The MPS2907ARLRM is a NPN bipolar transistor, meaning it has a negative electron concentration (N) and a P-type semiconductor base region. It is a single transistor, with a collector-to-base voltage of 20 volts, and a collector power dissipation of 625mW (milliwatts).The MPS2907ARLRM transistor can be used in a variety of applications, such as low power amplifiers, radio frequency (RF) amplifiers, switches and signal detectors. It can be used to amplify AC and DC signals, as well as power signals. The MPS2907ARLRM transistor is also used in logic, for transistor-transistor logic (TTL) circuits.The working principle of the MPS2907ARLRM transistor is quite simple. A small current (the base current) can be used to control a larger current (the collector current) between the collector and emitter. The base current is usually around a few microamps (μA) while the collector current can be much larger, in the tens of milliamps (mA). The current gain of the MPS2907ARLRM transistor is usually calculated by the ratio of the collector current to the base current, known as the current gain or hFE.The MPS2907ARLRM is an NPN transistor, meaning the base region is p-type and the collector and emitter regions are n-type. When a positive voltage is applied to the base, the electrons in the collector region become "energized" and are attracted to the base. This reduces the resistance between the collector and the emitter, allowing current to flow from the collector to the emitter. This current flow is the signal which is being amplified.When using the MPS2907ARLRM transistor in an application, it is important to ensure the correct voltage and current levels are used. The base current should always be kept to a minimum to avoid damage to the transistor and an external resistor is often used to limit the current flow through the base. The MPS2907ARLRM is typically biased with a voltage of 6V for small signal amplification and 12V for larger signals.The MPS2907ARLRM is a versatile transistor which is widely used in many applications. It can be used to amplify AC or DC signals, or to switch power signals, and is particularly useful in TTL circuits. It is important to ensure that the correct voltages and currents are used when working with the MPS2907ARLRM and an external resistor should always be used to limit base current. By understanding its working principle, the MPS2907ARLRM can be used to build effective and reliable circuits.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description