MSMCJ30A/TR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

TVS (Transient Voltage Suppressor) Diodes are an electronic component used to prevent potential damage by absorbing transient (i.e. short duration) over-voltages and suppressing them. They are programmed to allow current to move through when voltages are within a safe limit, but clamp current and dissipate most of the transient energy if the voltage exceeds the set limit. The MSMCJ30A/TR is a general purpose TVS diode, which can be used for a variety of applications.

The MSMCJ30A/TR is typically used to provide protection against high-energy transient voltage spikes such as electrical switching, lightning strikes, ESD (electrostatic discharge) and EFT (electrical fast transients). It is commonly used in computers and other electronic devices where over-voltage protection is needed, and its wide operating range, low capacitance, and bidirectional protection makes it suitable for many applications. It is also suitable for high frequency circuits, as it has a fast response time of <5 nanoseconds.

The MSMCJ30A/TR is available in a variety of sizes and packaging, including through-hole, surface mount, and axial packages. This allows it to be used in a wide range of applications, from consumer electronics to industrial and automotive applications. The MSMCJ30A/TR is also UL Recognized, RoHS Compliant, and REACH Compliant.

The MSMCJ30A/TR is a unidirectional device, meaning that it can only clamp voltage going from its anode to its cathode. The device has a breakdown voltage of 43 Volts and a hold voltage of 22 Volts, meaning that it can clamp any voltage higher than 43 Volts to about 22 Volts and still safely protect the circuit. It has a peak pulse power rating of 8,000 W with a 10/1000 μs waveform, and it can absorb up to 4,000 Amp of surge current. It also has a peak pulse current rating of 10 Amps at 1.2 Ms, meaning that it can protect circuits against up to 10 Amps of transient current while only letting up to 1.2 mAmps of steady-state current pass through.

The working principle behind the MSMCJ30A/TR is fairly simple. When a transient voltage is applied, it causes the p-n diode junction to become forward-biased. This results in a large current flowing through the diode and the device quickly dissipates the energy. As the voltage increases, the device continues to absorb the energy until it reaches the trigger voltage, at which point it clamps the voltage at the hold voltage and the device enters its steady-state current limit.

Overall, the MSMCJ30A/TR is a versatile device that can be used in a variety of applications such as consumer electronics, computers, industrial, and automotive electronics. It is designed to protect circuits against over-voltages and high-energy transient voltage spikes, and its low capacitance and fast response time makes it suitable for high frequency circuits. Its UL Recognized, RoHS Compliant, and REACH Compliant design provides an additional level of safety when it comes to protecting sensitive electronics.

The specific data is subject to PDF, and the above content is for reference