MVA63VC2R2MD55TP

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum electrolytic capacitors are widely employed in circuits of all sorts of electronic equipment, from home appliances to large industrial systems. The MVA63VC2R2MD55TP is a type of aluminum electrolytic capacitor that is frequently utilized due to its low cost, large capacity, and wide range of other advantageous properties.

The MVA63VC2R2MD55TP is an axial lead device, consisting of two anodized aluminum plates and a separator in between them. The thin film of oxide on the surface of the aluminum plates acts as a dielectric, allowing for the capacitor to store an electrical charge. On either end of the capacitor are two leads consisting of a a wire wound around the ends of the aluminum plates, allowing for a physical connection to the rest of circuitry.

The MVA63VC2R2MD55TP is a rather large capacitor. The aluminum plates are approximately 2mm long, and while the overall diameter of the capacitor is significantly smaller, measuring only 6mm in diameter. The wide ratio between length to diameter allows the capacitor to take advantage of its large cross-sectional area, which in turn allows the device to have a relatively low equivalent series resistance.

The MVA63VC2R2MD55TP is primarily used in DC power supplies, owing to its relatively low equivalent series resistance, and the fact that it does not require a controlled electric field like other capacitors. As such, it can operate at higher voltages than other types of capacitors. In addition, aluminum electrolytic capacitors are typically more reliable than other capacitors when used at higher temperatures.

The most common application of the MVA63VC2R2MD55TP is in high power DC filter circuits. Here, the device function to filter out the high frequency noises created by switching power supplies, and thus allow for the circuit to work at higher efficiency. Another common application is in battery back-up units, where the capacitor is used to absorb power surges and protect sensitive electronic devices. It can also be used to couple high voltage signals between stages in an electronic circuit.

In terms of operation, the MVA63VC2R2MD55TP utilizes capacitance as its main principle of operation. The capacitor stores electrical energy in the form of a voltage between the two plates, according to the equation C = Q/V. This stored charge can then be released from the capacitor after the electrical potential has been changed, and the stored charge is used to "buff," or even out, the electrical signal. In this way, the capacitor can be used to filter out high frequency signals or reduce spikes in electrical load.

Overall, the MVA63VC2R2MD55TP is a highly versatile aluminum electrolytic capacitor. Its relatively low equivalent series resistance, large capacity, and ability to handle high temperatures makes it suitable for a wide range of applications, from consumer electronics to industrial systems. Its relatively small size and low price point also means that it is an ideal choice where space and cost are critical factors in the design of the circuit.

The specific data is subject to PDF, and the above content is for reference