NM93C46LZM8

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The NM93C46LZM8 is a type of memory integrated circuit (IC). It is a low-voltage and low-power serial EEPROM device. This device is available in 8/16/32K bits of memory size with byte/word write protection and byte-wide I/O footprint. It is applicable for a wide range of systems such as automotive, computer, industrial and I/O applications.

The NM93C46LZM8 consists of a 4K-bit serial EEPROM memory array organized into 16 words of 16 bits each and a 32-bit address counter, controlled by three-level control logic. It is fabricated using CMOS technology on a single silicon wafer. This device utilizes a three-level control logic circuit and a high-speed, low-power CMOS state machine architecture. This device is designed to operate on a single 5V supply, while all operations are accomplished with a low voltage of 1.65V to 3.6V. The device has built-in self-timed write cycle and offers high speed with a typical write time of 5ms.

The NM93C46LZM8 has multiple read and write operations. In the read function, bytes and words can be read using the appropriate read cycles. For writing a single word, an invalid address must first be written and then followed by the specific data word. Writes can be done in two different cycles; a write cycle or a write-and-protect cycle. The write-and-protect cycle is an efficient means of preventing data corruption. This cycle stores the data and simultaneously sets write protection bit which ensures that the protected data will not be changed. The device is provided with a device ID, write-protect-lock bit, and three control bytes including an 8-bit control register, 8-bit write-protect register, and 16-bit status register.

The NM93C46LZM8 is a reliable and easy to use device. The memory array is protected against accidental writes due to power failure, inadvertent writes and other conditions. The device is equivalent to the JEDEC-standard serial EEPROM and is fully compliant with the 2-wire serial interface protocol. It is available in both 8/16/32K bit densities with two-wire or three-wire interfaces. It is also available in two different packages; a 16-pin Plastic Leadless Chip Carrier (PLCC) and an 8-pin Small Outline Integrated Circuit (SOIC) package.

The NM93C46LZM8 is a versatile, low-power and cost-effective memory IC that is suitable for a wide range of applications. It can be used in automotive, computer, industrial and I/O applications to control system settings and store data. The device is specifically designed to operate with a single 5V supply and is also compatible with a wide range of operating voltages. Its built-in self-timed write cycle and high speed write time make it an ideal choice for applications that require frequent memory access. Additionally, the device is provided with an 8-bit write-protect register and a 16-bit status register that can be used to prevent data corruption or accidental writes.

The specific data is subject to PDF, and the above content is for reference