OPI1280-032

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators are devices that use light waves to provide electrical isolation between two circuits, isolating them from each other while allowing them to communicate indirectly. The OPI1280-032 is a type of optoisolator component known as a transistor, photovoltaic output optoisolator. It is designed to provide complete galvanic isolation between an input and an output circuit in a single-stage, compact device. The variety of applications for such optoisolators is vast, and the working principles of the OPI1280-032 can be broken down into its individual components.

First and foremost, the OPI1280-032 contains two parts which help to achieve complete electrical isolation between input and output. These components are known as the optically coupled devices and the isolation barrier. The optically coupled device is composed of an LED (or light emitting diode) that is connected to the input. This LED is what emits the light waves that carry information from the input to the output. The light waves are then detected by a photodiode-type semiconductor device, which converts the light into an electrical current and sends the information to the output. The isolation barrier separates the two sides, insulating the input from the output, but still allowing the data from the input to be transmitted through the light waves.

The OPI1280-032 operates in two general modes. In the first mode, the LED is activated by the input current and produces a light signal that is transmitted across the gap to the photodiode. When this signal is detected, the photodiode conducts a current through the isolation barrier which switches the transistor output, thus completing the circuit. This is known as the logic compatible mode. In the second mode, the LED is not activated on the input current. Instead, when the photodiode detects the incoming light waves, it maintains a constant current through the barrier and takes the transistor output to a predetermined logic state. This is known as the “light-only” mode.

The OPI1280-032 is used in a variety of applications, most of which require complete electrical isolation between two devices. It can be used to protect sensitive digital equipment from hazardous or unstable inputs, to isolate low power systems from the higher voltage found in industrial systems, and to simplify on-board wiring. It is also used to increase the accuracy and safety of communication between two devices by avoiding direct contact between them. Lastly, the OPI1280-032 can be used to transmit serial data from one device to another, with the LED and photodiode acting as a sort of relay that passes the signal over a physical gap.

In conclusion, the OPI1280-032 is an important component in the realm of optoisolators, and its uses and working principles should be understood in order to take full advantage of its capabilities. Its two-part isolator coupled with the optical transmission of data over a gap makes it an ideal choice for anyone looking for a reliable electrical connection between two devices.

The specific data is subject to PDF, and the above content is for reference