OPI153

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators are considered one of the most effective solutions for protecting electronic components from hazardous voltage spikes and dangerous electromagnetic radiation. In particular, the OPi153 opto-isolator has proven to be an invaluable part of any designer’s toolbox due to its versatile applications and reliable operation.

As a Transistor, Photovoltaic Output (TPO) device, the OPi153 opto-isolator is specifically designed to provide galvanic isolation between an input signal and an output signal. This isolation is accomplished by connecting a light-sensitive switch (in the form of a photodiode) and an electrically-controlled switch (in the form of a transistor) in series through an isolated power supply. This allows the device to detect the input signal’s photodiode and quickly actuate the output transistor. As a result, the OPi153 can operate effectively in both low-impedance and high-impedance circuits.

Moreover, the OPi153 is designed to minimize noise leakage and troublesome ground loops. This is due to the fact that the opto-isolator is isolated from the surrounding circuitry so that the input and output signals can remain separate. Furthermore, the OPi153 can be used in a wide variety of applications, including power supplies, industrial control systems, and data acquisition units.

The OPi153 opto-isolator operates on the principle of photocurrent generation. Photocurrent refers to the current that is generated when light is incident on a semiconductor material. This current is generated due to the recombination of electron-hole pairs and the consequent release of energy as electrons move to lower energy levels. In the case of the OPi153 opto-isolator, the photodiode generates a photocurrent when the light source is activated, which is then used to actuate the output transistor.

The OPi153 opto-isolator is composed of a photodiode, a transistor, and an isolated power supply. The photodiode is used to detect when the light source is activated and generate the corresponding photocurrent. This photocurrent is then applied to the gate of the output transistor, which is actuated when the light source is activated. Finally, the output signal is isolated from the input signal by the isolated power supply, which ensures that the output signal is not affected by any electrical noise or interference from the surrounding circuits.

The OPi153 opto-isolator is a versatile, reliable, and effective means of isolating input and output signals. It can be used to provide galvanic isolation in a wide variety of applications and can also be used to minimize noise leakage and troublesome ground loops. The OPi153 is a must-have for any designer’s toolbox.

The specific data is subject to PDF, and the above content is for reference