PMG85XP,115

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The PMG85XP,115 is a type of Transistors - Field Effect Transistors (FETs), specifically, a single Metal Oxide Semiconductor Field Effect Transistor (MOSFET). It is a popular integrated circuit (IC) for use in a wide range of applications, both analog and digital, due to its features and affordability. This article will discuss the application field and working principle of the PMG85XP,115.

Application Field

The PMG85XP,115 is an extremely versatile integrated circuit and can be used in a variety of settings. It can be used as an amplifier, a voltage regulator, or as a voltage level shifter. Additionally, the PMG85XP, 115 can be used as an audio amplifier, a power supply regulator, and a digital signal controller (DSC). It is also used in embedded systems, such as programmable logic controllers (PLCs), as a phase control circuit, or as a bridge rectifier.

The PMG85XP,115 is also popular in light-emitting diode (LED) driver circuits, where its low on-resistance and fast switching speeds make it ideal for controlling the LED brightness. It can also be used as a switching regulator, controlling the output current or voltage, providing stability and protection to the system. It is also used in communication networks, such as Ethernet, Wi-Fi, and cellular networks, for efficient data transfer and power utilization.

Working Principle

The basic working principle of the PMG85XP,115 is its ability to control the flow of electric current passing between the drain and source terminals. It does this by allowing electric current to pass through a resistive layer of silicon between the source and drain. This resistive layer is known as the MOSFET’s gate. When a gate voltage is applied to the MOSFET, it controls the resistance between the source and drain, allowing the current to flow or to be blocked, depending on the type of MOSFET.

The PMG85XP,115 operates in enhancement mode. In this mode, the source and drain are connected to the gate using an insulated gate field effect transistor, or insulated gate bipolar transistor (IGBT). When the gate voltage is at a lower level than the source voltage, it is in an off-state and no current will flow. When the gate voltage is raised above the source voltage, it is in an on-state and current will flow.

The PMG85XP,115 also offers several features and capabilities, such as over-voltage protection, under-voltage lock-out, and over-current protection. It has a low on-resistance and a fast switching speed and can handle up to a 35A current. This makes it ideal for applications that require rapid switching, such as LED drivers and power supplies. It also offers an internal temperature limit, protecting the chip from damage caused by excessive heat.

Conclusion

The PMG85XP,115 is a versatile and affordable MOSFET, suitable for a wide range of applications. Its features, such as its low on-resistance, fast switching speed, and over-voltage protection, make it particularly suitable for LED drivers and power supplies. At the same time, the PMG85XP,115 is easy to use and is a great choice for those just starting out with FETs.

The specific data is subject to PDF, and the above content is for reference