S30ML512P30TFI503 Integrated Circuits (ICs)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The S30ML512P30TFI503 is a 512Mb (64M x 8) Serial Flash Memory with Dual and Quad SPI. It provides a storage solution for systems with limited space, pins, and power. The memory is well suited for storing code and/or data in applications where low to moderate code execution speed and low power dissipation are important.

The S30ML512P30TFI503 has an industry-standard serial interface that allows full-duplex operation at up to 50 MHz (100 MHz max). It consumes very low active power, and its standby current reduces dramatically in sleep mode. The memory can be write-protected with a block-protect mechanism. The device also features a power-down (reset) pin (DPD) to reset the device for power-on-reset or other conditions.

The S30ML512P30TFI503 applies to automotive, communication, consumer, digital home, industrial, medical and portable applications. In automotive applications, it is used in domain controllers, performance ECUs, and gateways. In communication, it is used for VoIP gateways and routers. In consumer applications, it is used in set-top boxes, smart TVs, and digital media players. In digital home applications, it is used in routers, storage systems, media players, and gateways. In industrial applications, it is used in robots and controllers. In medical applications, it is used in medical imaging and healthcare record systems. In portable applications, it is used in medical device control, vending machines, and payment systems.

The working principle of the S30ML512P30TFI503 includes Serial Peripheral Interface (SPI) programming, memory organization, and erase operations. Serial Peripheral Interface programming mode is the standard protocol used to transfer data to and from the device. The device has 512Mb organized as 64Mx 8 with five address bits, A0 - A4, to select one of the 32K x 8-bit memory locations. The erase operations allow for individual memory blocks of 32K x 8 to be erased. This can be done by either one command or in more for finer control.

The S30ML512P30TFI503 has two write modes, page write and buffered page write. Page write mode allows up to 128 bytes (64 words) of data to be written from the buffer. This can take up to 2048 bytes (1024 words) at a time. Buffered page write mode allows the device to write up to 256 bytes (128 words) of data from the buffer. This can take up to 4096 bytes (2048 words) of data.

The S30ML512P30TFI503 also has a deep power-down mode which is used to reduce power consumption when the device is not needed. Deep power-down mode can be enabled with a specific command. Once enabled, the device will drop to an extremely low standby current. All of the write and erase operations will be inhibited in deep power-down mode.

In conclusion, the S30ML512P30TFI503 is a 512Mb Serial Flash Memory with Dual and Quad SPI. It is well suited for automotive, communication, consumer, digital home, industrial, medical and portable applications. It has an industry-standard serial interface that allows full-duplex operation at up to 50 MHz (100 MHz max). It also has two write modes, page write and buffered page write, and a deep power-down mode to reduce power consumption when the device is not needed.

The specific data is subject to PDF, and the above content is for reference