Allicdata Part #: | SE5532NG-ND |
Manufacturer Part#: |
SE5532NG |
Price: | $ 0.00 |
Product Category: | Integrated Circuits (ICs) |
Manufacturer: | ON Semiconductor |
Short Description: | IC OPAMP GP 10MHZ 8DIP |
More Detail: | General Purpose Amplifier 2 Circuit 8-PDIP |
DataSheet: | SE5532NG Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Voltage - Input Offset: | 500µV |
Base Part Number: | SE5532 |
Supplier Device Package: | 8-PDIP |
Package / Case: | 8-DIP (0.300", 7.62mm) |
Mounting Type: | Through Hole |
Operating Temperature: | -55°C ~ 125°C |
Voltage - Supply, Single/Dual (±): | ±3 V ~ 20 V |
Current - Output / Channel: | 38mA |
Current - Supply: | 8mA |
Series: | -- |
Current - Input Bias: | 200nA |
Gain Bandwidth Product: | 10MHz |
Slew Rate: | 9 V/µs |
Output Type: | -- |
Number of Circuits: | 2 |
Amplifier Type: | General Purpose |
Part Status: | Obsolete |
Packaging: | Tube |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
SE5532NG application field and working principle
The SE5532NG is a monolithic integrated circuit used in a variety of linear applications, and is classified as a linear amplifier, instrumentation amplifier and buffer amplifier. The SE5532NG can be used in a variety of linear applications, including power supply regulation, strain gauge signals, ultrasound and optical amplifier circuits, voltage control oscillators and other driver circuits.
The SE5532NG employs an integrated circuit structure composed of two input amplifier stages, one output amplifier stage, two integrated compensation networks and one error amplifier stage. Each of the input stages and output stages are separated for maximum signal isolation. The integrated error amplifier is used to monitor and control the internal circuit voltages, helping to ensure accurate and repeatable operation. In addition, the SE5532NG features built-in protection circuits that help protect the device from damage caused by over-current conditions.
The SE5532NG is well suited for linear applications, such as driving power MOSFETs, providing instrumentation amplifiers for transducers, and providing buffer amplifiers for low noise applications. The SE5532NG also offers benefits for high frequency applications such as active RC filters and driving current sources.
The SE5532NG has two input terminals, one output terminal and two ground terminals. The input terminals are used to receive a signal from a signal source, such as a voltage or current source. The output terminal is used to output a signal, such as to a driven device or signal transducer. The ground terminals are used to provide a common reference signal to the signal source and driven device.
The SE5532NG also features a gain control terminal, as well as a power supply terminal. The gain control terminal allows the user to adjust the gain of the device, while the power supply terminal allows the user to supply the device with the required power. The gain control terminal is also used to adjust the operating bias point of the device, to ensure optimal performance.
The SE5532NG operates on a wide range of supply voltages, from 5V to 20V, and can operate on both single and dual supplies. The output of the device is capable of driving loads up to 1A in peak current or 2A in average current, depending on the supply voltage. The device has a slew rate of 750V/microsecond, allowing for high speed operation. The SE5532NG also has an adjustable low frequency corner, allowing for accurate control of the slew rate.
The SE5532NG is capable of providing high speed and accurate linear performance in various linear applications. Its integrated design allows for a small form factor, and the supply voltage range, high output current capability and slew rate make it an ideal choice for use in a variety of linear applications.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
SE555DT | STMicroelect... | -- | 1000 | IC OSC SGL TIMER 500KHZ 8... |
SE555N | STMicroelect... | -- | 1000 | IC OSC SINGLE TIMER 500KH... |
SE555P | Texas Instru... | -- | 1151 | IC OSC SINGLE TIMER 100KH... |
SE555D | Texas Instru... | -- | 75 | IC OSC SGL TIMER 100KHZ 8... |
SE555DRG4 | Texas Instru... | -- | 1000 | IC OSC SGL TIMER 100KHZ 8... |
SE555DG4 | Texas Instru... | 0.36 $ | 1385 | IC OSC SGL TIMER 100KHZ 8... |
SE5532AD8G | ON Semicondu... | -- | 2717 | IC OPAMP GP 10MHZ 8SOICGe... |
SE555DR | Texas Instru... | -- | 52500 | IC OSC SGL TIMER 100KHZ 8... |
SE555QS-13 | Diodes Incor... | -- | 1000 | IC OSC SGL TIMER SO-8555 ... |
SE5532AD8 | ON Semicondu... | -- | 1000 | IC OPAMP GP 10MHZ 8SOICGe... |
SE5532AD8R2 | ON Semicondu... | 0.0 $ | 1000 | IC OPAMP GP 10MHZ 8SOICGe... |
SE5532N | ON Semicondu... | -- | 1000 | IC OPAMP GP 10MHZ 8DIPGen... |
SE5532NG | ON Semicondu... | 0.0 $ | 1000 | IC OPAMP GP 10MHZ 8DIPGen... |
SE5534AN | ON Semicondu... | -- | 1000 | IC OPAMP GP 10MHZ 8DIPGen... |
SE5534ANG | ON Semicondu... | 0.0 $ | 1000 | IC OPAMP GP 10MHZ 8DIPGen... |
SE5534N | ON Semicondu... | 0.0 $ | 1000 | IC OPAMP GP 10MHZ 8DIPGen... |
SE5534NG | ON Semicondu... | 0.0 $ | 1000 | IC OPAMP GP 10MHZ 8DIPGen... |
SE5501L-R | Skyworks Sol... | 1.26 $ | 1000 | IC FRONTEND MOD 802.11N D... |
SE5510T-R | Skyworks Sol... | 0.0 $ | 1000 | IC FRONTEND MOD 802.11N D... |
SE5511T-R | Skyworks Sol... | 0.0 $ | 1000 | IC FRONTEND MOD 802.11N D... |
SE5515A-R | Skyworks Sol... | -- | 1000 | IC FEM DUAL BAND LNA 4X4 ... |
SE5503A-R | Skyworks Sol... | 1.36 $ | 1000 | IC FRONTEND MOD 802.11ABG... |
SE5502L-R | Skyworks Sol... | -- | 1000 | IC FRONTEND MOD 802.11N D... |
SE5532AD8R2G | ON Semicondu... | 0.48 $ | 1000 | IC OPAMP GP 10MHZ 8SOICGe... |
Ultra Precision Current Sense Amplifier ...
Operational Amplifiers - 4-Channel, 10MH...
IC OPAMP GP 600KHZ 8SOICGeneral Purpose ...
IC OPAMP VFB 150MHZ 8UMAXVoltage Feedbac...
IC OPAMP VFB 215MHZ SOT23-5Voltage Feedb...
IC OPAMP BUFFER 660MHZ 8SOICBuffer Ampli...