SMF5.0CA-TP

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

A Transient Voltage Suppression (TVS) diode is a device used to protect electrical and electronic circuits from damage caused by high voltage transients or power surges. TVS diodes are designed to protect circuits from excessive voltage or current and provide protection against electrostatic discharge (ESD) and electrical fast transients (EFT).

The SMF5.0CA-TP is a TVS-diode device specially designed to provide protection against high voltage transient surges. It is a unidirectional device that prevents over-voltage spikes or surges from entering sensitive electronic equipment, by clamping the surge as it appears at the transient’s peak. The SMF5.0CA-TP is specifically designed to protect circuits from transients with peak levels of 5.0V or less.

The SMF5.0CA-TP consists of two elements: an electrostatically activated zener diode and a bidirectional transistor. The electrostatically activated zener diode acts as a voltage reference and serves to keep the voltage on the test circuit at a certain level. If the voltage on the test circuit exceeds the zener diode’s reference level, it will activate the bidirectional transistor, which will provide a low-impedance path which diverts the surge away from the test circuit and into the ground. This protects the test circuit from damage.

In addition to protecting the test circuit from surges, the SMF5.0CA-TP also provides ESD and EFT protection. The electrostatically activated zener diode ensures that no voltage higher than its reference level is applied to the test circuit, which keeps ESD from causing damage. The bidirectional transistor also acts as a path for the EFT current to be diverted away from the test circuit and into the ground, preventing EFT from damaging the circuit.

The SMF5.0CA-TP is a device that is designed to protect sensitive electronic components or circuits from damage caused by high voltage transients or power surges. It consists of two components, an electrostatically activated zener diode and a bidirectional transistor. The zener diode serves to maintain the voltage on the protected circuit at a certain level, while the bidirectional transistor provides a path for any transient surges to be diverted away from the test circuit and into the ground. The device also provides ESD and EFT protection, further safeguarding the test circuit from any potential damage.

The specific data is subject to PDF, and the above content is for reference