Polarization:	Polar
Package / Case:	Radial, Can
Mounting Type:	Through Hole
Surface Mount Land Size:	--
Height - Seated (Max):	0.433" (11.00mm)
Size / Dimension:	0.197" Dia (5.00mm)
Lead Spacing:	0.079" (2.00mm)
Ripple Current @ High Frequency:	75mA @ 100kHz
Ripple Current @ Low Frequency:	30mA @ 120Hz
Applications:	General Purpose
Ratings:	--
Series:	SMG
Operating Temperature:	-40°C ~ 85°C
Lifetime @ Temp.:	2000 Hrs @ 85°C
ESR (Equivalent Series Resistance):	106 mOhm @ 120Hz
Voltage - Rated:	100V
Tolerance:	±20%
Capacitance:	2.2µF
Part Status:	Obsolete
Lead Free Status / RoHS Status:	--
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to Aluminum Electrolytic Capacitors

Aluminum electrolytic capacitors are one of the widely used electrolytic capacitors, as they have a high capacity, long life cycle, and small size. They are commonly used for power supply applications such as in computers and industrial electronics. This type of capacitor has two metallic electrodes; an anode and a cathode, with a non-conductive electrolyte between them. This electrolyte serves as an ion source to store electrical energy. The anode of aluminum electrolytic capacitors is usually made of aluminum foil. This is an excellent conductor of electricity and is covered in a conductive oxide layer. The oxide layer is produced by soaking the aluminum in an electrolyte solution and applying an electric current. This creates a thin layer of aluminum oxide (Al2O3) on the surface of the foil, which acts as an insulating layer. The outer casing of the capacitor is a non-conductive material that isolates the aluminum electrode from the outside environment and serves as a container to hold the electrolyte.

SMG100VB2R2M5X11LL Application Field and Working Principle

The SMG100VB2R2M5X11LL aluminum electrolytic capacitor is a high voltage capacitor designed for use in industrial and computer parts applications. It is rated for a capacitance of 100 uF at a maximum operating voltage of 370 volts. This capacitor features an electrolyte that not only serves as an ion source, but also functions as a dielectric to store and deliver a large amount of energy. It also has a long life cycle and is considered to be a reliable, high-performance component. The working principle of the SMG100VB2R2M5X11LL aluminum electrolytic capacitor is based on the concept of capacitance. When a voltage is applied between the two electrodes, electrical charge is stored and released on each electrode. The oxide layer on the anode prevents the current from passing through it and instead concentrates it on the outside surface, where it will be used to store electrical energy. The amount of electrical energy stored in the capacitor depends on the applied voltage, the capacitance of the capacitor, and the type of electrolyte used. The SMG100VB2R2M5X11LL aluminum electrolytic capacitor is commonly used in power supply applications to store and deliver a large amount of energy. It can be used to filter high frequencies, reduce signal noise, and increase the power supply’s efficiency. Its long life cycle and reliable performance make it a good choice for industrial and computer parts applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description