SMG50VB152M20SLL

Series:	SMG
Packaging:	Bulk
Lead Free Status / RoHS Status:	--
Part Status:	Obsolete
Capacitance:	1500µF
Tolerance:	±20%
Voltage - Rated:	50V
ESR (Equivalent Series Resistance):	2.562 Ohm @ 120Hz
Lifetime @ Temp.:	2000 Hrs @ 85°C
Operating Temperature:	-40°C ~ 85°C
Polarization:	Polar
Ratings:	--
Applications:	General Purpose
Ripple Current @ Low Frequency:	1.57A @ 120Hz
Ripple Current @ High Frequency:	1.6956A @ 100kHz
Lead Spacing:	0.394" (10.00mm)
Size / Dimension:	0.787" Dia (20.00mm)
Height - Seated (Max):	0.787" (20.00mm)
Surface Mount Land Size:	--
Mounting Type:	Through Hole
Package / Case:	Radial, Can

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum Electrolytic Capacitors are a common type of capacitors that are found in both small- and high-voltage electronic circuits. SMG50VB152M20SLL is an aluminum electrolytic capacitor that has been designed to have a maximum capacitance of 152 µF and a maximum working voltage of 50 V. The SMG50VB152M20SLL is well-suited for applications that require high capacitance values and high voltage ratings such as in lighting systems, automotive systems, air conditioning, computer systems, and other similar applications.The SMG50VB152M20SLL aluminum electrolytic capacitor follows the conventional construction of an electrolytic capacitor. The capacitor has two plates - a positive and negative plate - which are insulated from one another by an electrolyte. The capacitor is then connected to a form of two contacts that are used to supply an electrical current to the capacitor. The positive contact is the pin on the capacitor and the negative contact is usually connected to ground or a negative power source.The working principle of SMG50VB152M20SLL aluminum electrolytic capacitor is quite simple. When current flows through the capacitor, positive ions move towards the negative plate causing electricity to be stored between the plates, in the form of a static charge. This stored static charge, referred to as "capacitance" is discharged when the power supply is switched off, releasing the energy which was stored.When the capacitor is becoming charged, the positive plate begins to attract negative ions from the electrolyte and the negative plate will start to attract positive ions, thus creating a potential difference between the two plates. After the capacitor is fully charged, the voltage across the capacitor’s plates will remain constant. This is referred to as "Leakage current" and occurs naturally over time as the ions of the electrolyte continue to move freely across the plates.The SMG50VB152M20SLL aluminum electrolytic capacitor is capable of handling a maximum current of 2.00A for a maximum of 1000 hours without any noticeable degradation. This makes it an ideal choice for high power electrical applications such as motor starts or industrial controls.In conclusion, the SMG50VB152M20SLL aluminum electrolytic capacitor is a very reliable and cost effective way of providing storage and release of electrical energy in various high powered devices. Its robust construction, high voltage, high capacitance and high efficient make it well-suited for a wide range of electrical applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description