T707043364BY

Series:	--
Packaging:	Bulk
Part Status:	Active
Voltage - Off State:	400V
Voltage - Gate Trigger (Vgt) (Max):	3V
Current - Gate Trigger (Igt) (Max):	150mA
Voltage - On State (Vtm) (Max):	1.4V
Current - On State (It (AV)) (Max):	325A
Current - On State (It (RMS)) (Max):	500A
Current - Off State (Max):	30mA
Current - Non Rep. Surge 50, 60Hz (Itsm):	8000A @ 60Hz
SCR Type:	Standard Recovery
Operating Temperature:	-40°C ~ 125°C
Mounting Type:	Stud Mount
Package / Case:	DO-200AB, B-PUK
Supplier Device Package:	T-70

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Thyristors - SCRs

Thyristors are solid-state electronic devices that are used to switch and control large amounts of currents and/or voltages. They are often used in a variety of applications, such as power supplies, motor control, lighting dimmers, and more. The most common type of thyristor is the Silicon-Controlled Rectifier (SCR), which is a three-terminal device that works like a switch.The SCR is able to control the flow of current in both directions by using thyristor switching principles. When current passes through the anode of the SCR, it triggers the thyristor and turns it on, allowing current to pass through the anode-cathode junction. When the current reaches a certain level, the SCR is then turned off, which stops any further current from passing through the device. The current level that is needed to turn the SCR off is known as the “holding current.”SCRs are mainly used in industrial applications, where their ability to precisely control high currents and voltages is needed. These devices are also popular in renewable energies, such as wind or solar power supplies, as they can accurately control the amount of power going to a certain application. In addition, SCRs are often used in electrical circuits as either selectors or as protective devices against over voltage, over current, and short circuits.Thyristors are also beneficial because they are relatively low-cost and require little power to operate. They are also highly reliable, as the solid-state design of the thyristor offers a degree of protection against physical damage. Additionally, the SCR can be easily programmed, as there are a variety of parameters that can be controlled, including the switching speed and holding current of the device.To conclude, the T707043364BY is an SCR that is used in industrial applications due to its capability to control high levels of current and voltages. The SCR works by turning on when current passes through its anode, and then turning off once it reaches a certain “holding current.” The T707043364BY is an ideal choice for industrial applications, as it is both reliable and low-cost. Furthermore, the device can be easily programmed to its desired settings, making it a great choice for a wide variety of applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description