TA6F9.1AHM3/6A

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

TA6F9.1AHM3/6A is a type of transient voltage suppression (TVS) diode that is designed to protect electrical circuits from fault currents and transient overvoltage generated by lightning, power line surges, and inductive loads.

The 6A version of the TA6F9.1AHM3/6A provides a higher surge capability than its 3A counterpart. In addition, it has a higher clamping voltage and lower peak pulse power rating. It is well suited for protecting sensitive, low-power applications where long-term reliability is a major concern.

The TA6F9.1AHM3/6A is ideal for use in automotive electronics, consumer electronics, networking applications, medical equipment, and other sensitive electronic components that are vulnerable to transient overvoltages. It can also be used to provide high-voltage surge protection for HVAC/R control systems, HMI and digital signage devices.

The TA6F9.1AHM3/6A is designed to clamp off transient voltages up to 60V with a breakdown voltage of about 10V. It has a maximum current at which it will withstand a transient surge and a capacitance value of less than 1pF. The device\'s peak pulse power rating is 2kW. It is rated for temperature operation from -40 to +85°C.

The TA6F9.1AHM3/6A is a two-terminal device with an anode and a cathode. The anode is the positive terminal of the device, while the cathode is the negative terminal. The anode is normally connected to the positive side of the voltage supply while the cathode is normally connected to ground. This makes it easier for the TVS diode to clamp transient voltages without damaging or shorting out the circuit.

The TA6F9.1AHM3/6A is designed to operate as a non-linear device, which means that its current-voltage (I-V) characteristic changes during the transient voltage surge. This is because its reverse-bias junction capacitance increases and causes a voltage drop across its two terminals. This voltage drop clamps the transient voltage and prevents it from flowing through the circuit.

In addition, TA6F9.1AHM3/6A is designed to be a temperature-independent device, meaning that its operation is not affected by temperature changes. This makes it ideal for use in high-temperature environments. It also has a high peak pulse power rating, which helps protect circuits from the damaging effects of spikes in the power supply.

The TA6F9.1AHM3/6A is an ideal choice for applications requiring fast response time and efficient transient voltage suppression. It is a reliable and cost-effective way to protect sensitive electronics from damage due to overvoltage transients.

The specific data is subject to PDF, and the above content is for reference