Allicdata Part #: | TC51-ND |
Manufacturer Part#: |
TC51 |
Price: | $ 0.00 |
Product Category: | Capacitors |
Manufacturer: | Cornell Dubilier Electronics (CDE) |
Short Description: | CAP ALUM 8UF 250V AXIAL |
More Detail: | 8µF 250V Aluminum Electrolytic Capacitors Axial, C... |
DataSheet: | TC51 Datasheet/PDF |
Quantity: | 1000 |
Moisture Sensitivity Level (MSL): | 1 (Unlimited) |
Lead Free Status / RoHS Status: | Contains lead / RoHS non-compliant |
1 +: | 0.00000 |
Polarization: | Polar |
Package / Case: | Axial, Can |
Mounting Type: | Through Hole |
Surface Mount Land Size: | -- |
Height - Seated (Max): | -- |
Size / Dimension: | 0.625" Dia x 1.125" L (15.88mm x 28.58mm) |
Lead Spacing: | -- |
Ripple Current @ High Frequency: | 246.25mA @ 2.4kHz |
Ripple Current @ Low Frequency: | 197mA @ 120Hz |
Applications: | General Purpose |
Ratings: | -- |
Series: | TC |
Operating Temperature: | -40°C ~ 85°C |
Lifetime @ Temp.: | 1000 Hrs @ 85°C |
ESR (Equivalent Series Resistance): | 15.27 Ohm @ 120Hz |
Voltage - Rated: | 250V |
Tolerance: | -10%, +50% |
Capacitance: | 8µF |
Moisture Sensitivity Level (MSL): | -- |
Part Status: | Obsolete |
Lead Free Status / RoHS Status: | -- |
Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Aluminum electrolytic capacitors are usually the largest component in an electronic circuit and are built with two electric conducting plates and a dielectric material placed in the middle of them. The most common type of aluminum electrolytic capacitor is the Electrolytic (TC51), which consists of an aluminum cathode, an electrolyte plate between the plates, and an anode. The anode is typically made up of a thin film of aluminum oxide, which acts as the insulating material between the two conducting plates. Electrolytic capacitors have many different applications in electronics and may be used for filtering, bypassing, and coupling.
TC51 aluminum electrolytic capacitors are the most widely used type of electrolytic capacitor. The TC51 has a very large capacity and is capable of holding a huge amount of charge. The capacity is determined by the size of the electrolyte plate, which is usually an aluminum foil. The thickness of the foil increases the capacitance of the device, and the surface area increases the power output. Most TC51 aluminum electrolytic capacitors are used for low voltage applications, but they can also be used for higher voltages if necessary.
The working principle of TC51 aluminum electrolytic capacitors is based on the polarization effect of the electrolyte plate between the two plates. When a voltage is applied to the capacitor, the electrolyte layer becomes polarized and an electric field is formed, which creates the electric potential between the two plates. The capacitance of the TC51 is determined by the ratio between the plate area and the dielectric material thickness, and is measured in Farads. The capacitance of the capacitor also increases when the voltage is increased.
TC51 aluminum electrolytic capacitors are used in a variety of applications ranging from energy storage to high-frequency oscillators. They are commonly used as energy storage devices in power supplies, voltage regulators, and signal amplifiers. They are also used in television sets, radios, cell phones, computers, and other electronic devices. They are also used in instrumentation, power supplies, and circuit protection devices. TC51 aluminum electrolytic capacitors are also used in high-frequency communications in military and commercial applications.
The life of a TC51 aluminum electrolytic capacitor is determined by the temperature and the size of the plate area. The constant current capacity of the device is the maximum current that can be supplied for a given temperature. At higher temperatures, the life of the capacitor can be reduced due to the electrolyte becoming chemically unstable. The lifetime of TC51 aluminum electrolytic capacitors is typically between 10 years and 50 years. Furthermore, they are usually designed to withstand temperatures up to 135 degrees Celsius (275 degrees Fahrenheit).
In conclusion, TC51 aluminum electrolytic capacitors are the most popular type of electrolytic capacitor. They have many different applications, including energy storage, high-frequency oscillators, and voltage regulators. They have a very large capacity and are capable of holding a huge amount of charge. The life of the capacitors is determined by the size of the plate area and the temperature, and they are typically designed to withstand temperatures up to 135 degrees Celsius. With such an excellent range of applications, TC51 aluminum electrolytic capacitors are a great choice for most electronic applications.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
TC51 | Cornell Dubi... | 0.0 $ | 1000 | CAP ALUM 8UF 250V AXIAL8F... |
TC510COG | Microchip Te... | 3.02 $ | 131 | IC ANLG FRONT END 17BIT 2... |
TC514CPJ | Microchip Te... | 3.26 $ | 153 | IC ANALOG FRONT END 17BIT... |
TC510COG713 | Microchip Te... | 2.29 $ | 1000 | IC ANALOG FRONT END 17BIT... |
TC514COI | Microchip Te... | -- | 1000 | IC ANALOG FRONT END 17BIT... |
TC514COI713 | Microchip Te... | 2.64 $ | 1000 | IC ANALOG FRONT END 17BIT... |
TC510CPF | Microchip Te... | 0.0 $ | 1000 | IC ANALOG FRONT END 17BIT... |
TC510EOG713 | Microchip Te... | 0.0 $ | 1000 | IC ANALOG FRONT END 17BIT... |
TC51N3002ECBTR | Microchip Te... | -- | 1000 | IC VOLTAGE DETCTR 3.0V SO... |
TC51N2202ECBTR | Microchip Te... | -- | 3000 | IC VOLTAGE DETCTR 2.2V SO... |
TC51N2702ECBTR | Microchip Te... | 0.67 $ | 3000 | IC VOLTAGE DETCTR 2.7V SO... |
CAP ALUM 33UF SMD33F 400V Aluminum Elect...
CAP ALUM 33UF SMD33F 400V Aluminum Elect...
CAP ALUM 68UF SMD68F 250V Aluminum Elect...
CAP ALUM 68UF SMD68F 250V Aluminum Elect...
CAP ALUM 100UF SMD100F 200V Aluminum Ele...
CAP ALUM 100UF SMD100F 200V Aluminum Ele...